Results 1 to 25 of 25
Thread: Charge only with liquid.
Threaded View
-
09-08-2011, 02:51 PM #1
Charge only with liquid.
Despite this statement being printed upon certain of the newer refrigerant cylinders.
I with few exceptions when charging from a vacuumed system.
Break the vacuum with Vapour to 0c/ relative prior to adding refrigerant in a liquid state.
(Through a manifold gauge so that the refrigerant leaves the cylinder in liquid form)
Sorry to the 2 posts below I did not make that clear.
Is it just me or do most adopt this practice?
Cheers GrizzlyLast edited by Grizzly; 09-08-2011 at 03:27 PM.