Results 1 to 50 of 77
Thread: Evap fin spacing and freezeup
Threaded View
-
09-01-2011, 02:31 AM #1
Evap fin spacing and freezeup
There are a lot of complaints on this forum about frozen up evaporators and some comments about fin spacing as one issue. I understand that a closer fin spacing means a higher capacity in a smaller package but there is obviously a point where freezing really becomes a problem. The question is ... is there a rule of thumb spacing to avoid this problem and what would trigger my sixth sense when looking at a outdoor unit while it is still at the wholesaler? Hope I asked this properly