Results 1 to 2 of 2

Threaded View

  1. 19-10-2010, 06:38 PM #1
    SkyWalker's Avatar
    SkyWalker
    SkyWalker is offline Senior Poster
    Join Date
    Nov 2006
    Location
    At home
    Posts
    181
    Rep Power
    18

    Factory set a TX6-Z15

    hi guys,

    Got a couple of these on a job (TX6-Z15 Alco controls expansion valve) I am going to and I want to set them to factory superheat setting (or as close as possible) I know they have been altered by others. I can find info on setting back the TCLE, HF, A and TRAE family of valves but nothing on the TX6 family? The chart i found says half the total turns is approx factory setting but as i say, it doesn't include the TX6 family?

    any help would be greatly appreciated hopefully someone has had the same problem before :/
    Last edited by SkyWalker; 19-10-2010 at 06:42 PM.
« Previous Thread | Next Thread »

Similar Threads

  1. Ice Block Machine: Hoping to start an Ice Factory. Please Help!!
    By promise1 in forum Commercial
    Replies: 15
    Last Post: 02-01-2011, 01:26 AM
  2. Water Flow in evaporator exceeds the factory rating, what will happen?
    By aryramadhan in forum Fundamentals
    Replies: 7
    Last Post: 07-02-2010, 09:33 AM
  3. I need book about factory for
    By alisa in forum Refrigeration Books
    Replies: 0
    Last Post: 28-10-2009, 05:08 PM
  4. factory A/C too small
    By Sledge in forum Commercial
    Replies: 7
    Last Post: 26-05-2007, 12:46 AM
  5. New Israeli factory in Wales
    By chemi-cool in forum New Technologies
    Replies: 1
    Last Post: 10-01-2005, 11:07 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules