Results 1 to 2 of 2
Threaded View
-
08-10-2010, 01:58 PM #1
water softener effects on condensing tower
We recently added a water softener system large enough to soften the entire plant water supply to include the towers. We are softening the water supply to between 0 and 1 grains (0 – 17 ppm) harness. My concern is how is this going to affect my condensing towers? They are all older galvanized towers, the newest one being 15 years old.
I am ready articles about how it can destroy the tower, and I am also seeing articles that say you can run soft water just not below around 2 grains (35 ppm).
What are your thoughts on this?
Similar Threads
-
water cooled condensing unit
By sean1 in forum CommercialReplies: 5Last Post: 27-05-2010, 12:02 AM -
pure water from air
By Lc_shi in forum New TechnologiesReplies: 32Last Post: 26-02-2009, 12:25 PM -
Cooling tower evaporation, blowdown, makeup and cycles
By miltbeychok in forum IndustrialReplies: 5Last Post: 14-10-2005, 06:34 PM -
Cooling tower evaporation, blowdown, makeup and cycles
By miltbeychok in forum FundamentalsReplies: 0Last Post: 13-10-2005, 05:14 AM -
Building a wine cabinet
By Rory in forum Technical DiscussionsReplies: 38Last Post: 13-07-2004, 08:28 PM