Results 1 to 5 of 5
Thread: I need Expansion Volume
Threaded View
-
07-06-2009, 09:46 AM #1
iminsincere Guest
I need Expansion Volume
Input Data
1) System total hot water volume = 1,300 cu. meters (Including pipeliens & boilers)
2) Boiler Design Pressure = 200 psig
3) System Pressure = 10 bars (145 psig)
4) Water Inlet to Boiler = 140 deg. C
5) Water Outlet from Boiler = 155 deg. C
What will the total volume Expansion to Desing Expansion Vessel?
Similar Threads
-
problem with volume on frick screw compressor
By samlee12 in forum IndustrialReplies: 4Last Post: 29-10-2009, 06:06 AM -
problem with frick screw volume
By samlee12 in forum Industrial CompressorsReplies: 9Last Post: 20-06-2009, 02:46 PM -
Actual Expansion Valve Process
By AastroGuru in forum FundamentalsReplies: 11Last Post: 03-02-2009, 09:53 AM -
How an expansion tank works?
By Raadster in forum FundamentalsReplies: 6Last Post: 25-07-2008, 02:25 PM -
Volume ratio selection
By rosetennis in forum Industrial CompressorsReplies: 4Last Post: 14-07-2006, 02:10 AM
