Results 1 to 5 of 5
Thread: Ice Cube Maker SWITCH
Threaded View
-
27-11-2008, 12:40 PM #1
Ice Cube Maker SWITCH
Hi,, I have just got a Whirlpool S20B RSB21-A/G.. It is 2 years old and Never be Plumbed in. I have just plumbed it for the first time , and after switching off at the mains and turning it back on, The Ice Cube maker Filled up with Water, After a couple hrs the Cubes are frozen BUT the Teeth that turn to remove the Cubes do not appear to be turning,, They are sort of sticking Up and Out to the front Position.. I have a On/Off type Switch near the Front Water Dispenser on the front freezer door,, Is this for the Ice Cube maker, IF so should the Push Button Switch be In or Out..
Thanks
Similar Threads
-
flow switch connection
By afeef in forum The Trail of TearsReplies: 18Last Post: 23-12-2009, 06:55 PM -
Low Pressure Cut-off switch on Liquid line
By Vishnukurup in forum Air ConditioningReplies: 14Last Post: 03-12-2008, 09:34 AM -
Ice Maker (Nice Ice) Faulty: Help!
By ArthurLeigh in forum CommercialReplies: 4Last Post: 25-10-2008, 10:49 AM -
Hermetic analyzer " ANNIE" how do they work
By kengineering in forum Tools and CalculatorsReplies: 11Last Post: 02-03-2008, 06:10 PM -
Scotsman Dc33pa Ice Maker Troubleshooting
By Sean LaDart in forum Trouble ShootingReplies: 8Last Post: 13-02-2006, 08:01 PM