Results 1 to 2 of 2

Threaded View

  1. 04-06-2008, 01:24 PM #1
    saydi's Avatar
    saydi Guest

    How to commit ion a unit help????

    I need great advise, my boyfriend went for his trade test but failed the test of commissioning a unit and must write it over, I feel bad for him because he was so confident he would pass but failed because the temperatures he took on the unit or compressor or evaporator were wrong and the sum on the test paper involving the temperatures to calculate the units correct superheat was wrong. The whole sum was wrong. So he got a big wake up call. Please help guys. Please tell me how to correctly commission a unit and correctly calculate superheat of the unit. PLEASE
    Last edited by chillin out; 06-06-2008 at 09:06 PM.
« Previous Thread | Next Thread »

Similar Threads

  1. MICROPROCESSOR DIAGNOSTICS/Differnces beteween TK/CTC
    By REEFER-TEK in forum Transport
    Replies: 12
    Last Post: 27-03-2011, 04:12 AM
  2. SL/SB-400 Pump Down Procedures
    By absolute-zero in forum Transport
    Replies: 1
    Last Post: 29-01-2008, 09:27 PM
  3. Thermo King OptiSet
    By REEFER-TEK in forum Transport
    Replies: 4
    Last Post: 06-12-2007, 07:23 PM
  4. TK basic micro-p features and functions
    By REEFER-TEK in forum Transport
    Replies: 0
    Last Post: 05-12-2007, 06:25 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules