Results 1 to 1 of 1
-
03-03-2016, 10:44 AM #1
Danfoss Coolselector-2 Pipe Selection Criteria
Hi,
I'm using danfoss coolselector 2 software for selection of liquid and wet return line of ammonia refrigeration system. It provides 3 selection criteria for that which are as below:
- Pressure Drop or Velocity
- Pipe Size
- Saturated Temp. Drop (0.02K/m)
Please guide me which one is most accurate one and what is the default value of pressure drop in this software? and what are the recommended velocities for both lines?