Results 1 to 5 of 5
Thread: help please
-
19-05-2009, 10:20 AM #1
help please
Can someone help me?please.
-
19-05-2009, 12:50 PM #2
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,151
- Blog Entries
- 6
- Rep Power
- 36
Re: help please
Maybe, if you ask question!
-
20-05-2009, 12:08 AM #3
Re: help please
Question: How do these bits fit together?
Answer: Check the wiring diagram that came with the starter kit.Brian - Newton Abbot, Devon, UK
Retired March 2015
-
20-05-2009, 08:49 PM #4
Re: help please
The uncles are not serious, don't worry. Personally I never look at letters: S,W,R etc or the wires colours - always use multimeter to replace, or put a new current relay. Make sure that current is constantly supplied to the working winding of the motor through the relay's coil. But through its NO contact is being switched to the capacitor starting winding during the starting moment. If you have not yet switched your relay to your motor, give me know, I will tell you how to find where is which winding and how make the whole scheme.
-
21-05-2009, 01:56 PM #5
Re: help please
DIY jobbie perhaps ?????
If it was easy everyone would do it.