Results 1 to 4 of 4
Thread: Fast learning servisman
-
08-10-2007, 01:49 PM #1
improving poster
- Join Date
- Oct 2007
- Location
- Serbia
- Posts
- 29
- Rep Power
- 0
Fast learning servisman
Hello,
Thaks to the Brian_UK and Taz24 I will learn a lot.
But I have a question for Brian_UK.
In preview post Brian_UK explain me how the use charging cylinders wit single composition gases,
(I realise that charging cylinder for R410a hasn't got),
but what about charging cylinder for R407C gas.Is the same charging procedure(with charging cylinder for R407c)?
And
-How and where to measure subcooling?
I have many questions....
Thank you!!!!!!!
Aleksandar
-
08-10-2007, 05:31 PM #2
Veteran Poster
- Join Date
- May 2007
- Location
- NC
- Posts
- 262
- Rep Power
- 17
Re: Fast learning servisman
Links
Links 1
And more Links
Just about everything you need is in these links. Tons of info read over them all carefully.
-
08-10-2007, 09:34 PM #3
Moderator
I am starting to push the Mods: of RE Site Moderator : and general nice guy
- Join Date
- Mar 2001
- Location
- Dorset
- Age
- 76
- Posts
- 11,025
- Rep Power
- 60
Re: Fast learning servisman
Good set of links there Jon, thanks
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
08-10-2007, 11:42 PM #4
improving poster
- Join Date
- Oct 2007
- Location
- Serbia
- Posts
- 29
- Rep Power
- 0
Re: Fast learning servisman
Thank you BigJon3475.
I hope that you will answer me for my questions in
future,thank you again!
Similar Threads
-
Fast learning servisman
By bozicaleksandar in forum Heat PumpsReplies: 3Last Post: 08-10-2007, 01:35 PM -
Fast learning servisman
By bozicaleksandar in forum Heat PumpsReplies: 2Last Post: 07-10-2007, 11:49 AM -
Fast learning servisman
By bozicaleksandar in forum Heat PumpsReplies: 7Last Post: 05-10-2007, 08:26 PM
