Results 1 to 8 of 8
  1. #1
    Join Date
    Oct 2007
    Location
    Serbia
    Posts
    29
    Rep Power
    0

    Smile Fast learning servisman



    Hello,Everybody
    My name is Aleksandar.I am living in Belgrade-Serbia.
    I don't want to bother you about me,just want to help and
    expect help.
    I have a question, how to charge/recharge R410a?
    Does someone know all, step-by-step,procedure to charge or
    recharge R410a?Also know ,when unit in deep vacuum,or vacuum,liquid charging can break a tubes.
    How charging when is unit (with servise valve)above 5 meters from the floor?Does anyone know?
    It is about small unit (charge 2 kg).Split system.
    I have all equipment.

    Thank you!
    P.S.
    And if you have any questions about split systems ,I try to help.



  2. #2
    Brian_UK's Avatar
    Brian_UK is offline Moderator I am starting to push the Mods: of RE Site Moderator : and general nice guy
    Join Date
    Mar 2001
    Location
    Dorset
    Age
    76
    Posts
    11,025
    Rep Power
    60

    Re: Fast learning servisman

    Hi, and welcome to the forum.

    Charging with R410a is best done to the recommended weight required for the system.

    If the weight is unknown then charge by subcooling and superheat.

    Yes, charging liquid into a vacuum can fracture tubing. With any refrigerant that should be liquid charged you can either use a liquid charging device or throttle the liquid through your gauge lines.

    Once the pressure has risen above 0barg(0psig) then you can open the throttle and let the liquid directly in.

    For high access you need to use a scaffold tower or similar.
    Brian - Newton Abbot, Devon, UK
    Retired March 2015

  3. #3
    Join Date
    Oct 2007
    Location
    Serbia
    Posts
    29
    Rep Power
    0

    Smile Re: Fast learning servisman

    Quote Originally Posted by Brian_UK View Post
    Hi, and welcome to the forum.

    Charging with R410a is best done to the recommended weight required for the system.

    If the weight is unknown then charge by subcooling and superheat.

    Yes, charging liquid into a vacuum can fracture tubing. With any refrigerant that should be liquid charged you can either use a liquid charging device or throttle the liquid through your gauge lines.

    Once the pressure has risen above 0barg(0psig) then you can open the throttle and let the liquid directly in.

    For high access you need to use a scaffold tower or similar.
    Thank you very much,I know this,but I wasn't sure,but now,you help me to understand completly proces.
    One more question what is scafford tower?
    Thank you again!
    Aleksandar.

  4. #4
    Join Date
    Oct 2007
    Location
    Serbia
    Posts
    29
    Rep Power
    0

    Re: Fast learning servisman

    Thank you,Brian_UK.
    Please answer me,I have question about Refrigerant
    elektric blanket(300 W).
    View all my posts!
    Last edited by bozicaleksandar; 05-10-2007 at 03:24 PM.

  5. #5
    Join Date
    Oct 2007
    Location
    Serbia
    Posts
    29
    Rep Power
    0

    Smile Re: Fast learning servisman

    Hi,
    Sorry to bother you,I have a question?
    Can I use elektric blanket to charge R410a?
    I think not, but not sure(because composed refrigerant R410A).
    Thank you.

  6. #6
    Join Date
    Oct 2007
    Location
    Serbia
    Posts
    29
    Rep Power
    0

    Re: Fast learning servisman

    Please answer Brian_UK.

  7. #7
    Join Date
    May 2007
    Location
    NC
    Posts
    262
    Rep Power
    17

    Re: Fast learning servisman

    Quote Originally Posted by bozicaleksandar View Post
    Please answer Brian_UK.

    relax give them time to answer......

  8. #8
    Brian_UK's Avatar
    Brian_UK is offline Moderator I am starting to push the Mods: of RE Site Moderator : and general nice guy
    Join Date
    Mar 2001
    Location
    Dorset
    Age
    76
    Posts
    11,025
    Rep Power
    60

    Re: Fast learning servisman

    Quote Originally Posted by bozicaleksandar View Post
    One more question what is scafford tower?
    A construction of metal tubes built together to provide a climbing and working framework..

    http://www.bpsaccesssolutions.co.uk/...rs-gallery.htm

    Quote Originally Posted by bozicaleksandar View Post
    Hi,
    Sorry to bother you,I have a question?
    Can I use elektric blanket to charge R410a?
    I think not, but not sure(because composed refrigerant R410A).
    Thank you.
    If you mean a blanket to warm the gas bottle then yes you can but not too hot!

    Quote Originally Posted by bozicaleksandar View Post
    Please answer Brian_UK.
    Remember the time zone differences....
    Brian - Newton Abbot, Devon, UK
    Retired March 2015

Similar Threads

  1. learning more
    By abcdefg1675 in forum Tools and Calculators
    Replies: 3
    Last Post: 05-10-2007, 08:36 PM
  2. Website for learning refrigeration
    By Alistair in forum Training
    Replies: 3
    Last Post: 05-05-2007, 03:44 PM
  3. Distance Learning
    By harsen in forum Training
    Replies: 2
    Last Post: 11-03-2007, 11:36 AM
  4. just learning
    By frankmcbride in forum Chit Chat & Service Stories
    Replies: 5
    Last Post: 03-06-2006, 10:13 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •