Results 1 to 3 of 3
Thread: H0 on Mitsubishi Controller
-
29-09-2007, 12:20 PM #1
H0 on Mitsubishi Controller
Urgent Help is needed on Mitsi system (Today)
PuhZ-RP125VHA2 outdoor PLA-RP125BA indoor
Controller PAR-F27MEA.(Common to both systems)
HO will not go off on start up. There are no rotary
swicthes to set the address on outdoor or indoor
Controller is set 01 factory setting.
If it is an address problem how do I set it up and on which dip switches, or could I have the wrong controller.
Thanks
Trevor
-
29-09-2007, 01:11 PM #2
Re: H0 on Mitsubishi Controller
From memory it is the dip switches on the outdoor unit, but I can't remember which ones, sorry.
AndyLast edited by Andy AC; 29-09-2007 at 01:28 PM.
-
29-09-2007, 07:24 PM #3
Re: H0 on Mitsubishi Controller
Andy: Have looked on Mitsu Products and we have ordered the wrong controllers. Spent 2 hours late last night trying to get them running.
Thanks
Trevor
Similar Threads
-
Mitsubishi controller G50a
By august in forum Air ConditioningReplies: 7Last Post: 19-11-2007, 05:28 PM -
Daikin Hard wired controller
By marc5180 in forum Air ConditioningReplies: 16Last Post: 10-11-2007, 06:43 PM -
Mitsubishi compressor lock
By marc5180 in forum Air ConditioningReplies: 29Last Post: 08-10-2007, 05:48 PM -
Controller wiring
By Mickvee in forum Air ConditioningReplies: 2Last Post: 30-12-2005, 02:04 AM -
Fan Controller
By Abe in forum Trouble ShootingReplies: 4Last Post: 12-01-2002, 02:21 AM