Results 1 to 2 of 2
-
Block ejector system for platefreezer
Optimar Giske has developed a system that is snap on to our platefreezers.
Here is a video from the test run on a system I commissioned last week (ship's out fishing now and not one phonecall )
at the end you see one of the factory workers loading the blocks into a new freezer by hand so they could run the robot one more time.
http://www.4shared.com/file/24752072...092007012.html
the automatic freezers have automatic block dividers. as the blocks are pushed up, the block dividers slide down and the freezer is ready to be emptied by the robot.
Sorry if this is a shameless plug
-Cheers-
Tycho
-
21-09-2007, 08:22 PM #2
Re: Block ejector system for platefreezer
Hi Tycho
You sure do work with some interesting stuff. I get bored stupid working on split Ac
Cheers Jon
Similar Threads
-
Air Cooled Mono Block Units & high Ambient
By smpsmp45 in forum Technical DiscussionsReplies: 4Last Post: 11-12-2007, 06:29 AM -
Designers block! Need pics of water cooled kit!
By The MG Pony in forum Air ConditioningReplies: 6Last Post: 03-08-2007, 01:33 AM -
Vilter 440VMC Block heater info needed
By Sun Dragon in forum Industrial CompressorsReplies: 0Last Post: 14-01-2007, 06:32 PM -
New kid on the block
By Yogibear in forum New to REReplies: 7Last Post: 21-12-2006, 10:40 PM