Results 1 to 4 of 4
Thread: Simag ice machine
-
10-08-2010, 07:02 AM #1
Simag ice machine
Hi,
Have a ice machine with LED flashing "Bin Full", yet no harvest at all (bin empty). Reset button not responding. All components working, compressor, fan, pump, water all okay.
Any body got any suggestions or is this just a fault with the PC board.
Regards
Len
-
10-08-2010, 08:11 AM #2
Re: Simag ice machine
sounds like the bin stat which should be located inside the bin near the top.
-
11-08-2010, 11:29 AM #3
Re: Simag ice machine
Thanks Craig, will have a look at that. Regards Len
-
13-08-2010, 07:04 PM #4
Re: Simag ice machine
hi
pls check magnetic switch it may out of order
Similar Threads
-
Ice Block Machine: Hoping to start an Ice Factory. Please Help!!
By promise1 in forum CommercialReplies: 15Last Post: 02-01-2011, 01:26 AM -
Simag SV135 ice machine
By Andy W in forum CommercialReplies: 8Last Post: 10-08-2010, 07:57 AM -
Manitowoc Ice Machine
By crazycohiba in forum CommercialReplies: 3Last Post: 27-08-2009, 05:19 AM -
elmeco slushy machine
By Temprite in forum CommercialReplies: 1Last Post: 14-09-2008, 08:58 AM -
Cattabriga Ice Cream Machine
By Abe in forum Trouble ShootingReplies: 9Last Post: 26-04-2003, 01:06 PM