Results 1 to 6 of 6
Thread: testo 523 analyzer troubles
-
14-09-2007, 02:44 PM #1
testo 523 analyzer troubles
hi guys..
is anyone out there using the testo hvac analyzers?
I purchased the new model 523 kit and its lasted just over a week before it shat itself whilst adjusting superheat on a newly commsioned system.
one minute i was getting a temp reading from the clamp K thermocouple and then the temp reading suddenly dissapeared.. Either the thermocouple is faulty or the analyzer is faulty.
Im a little dissapointed but im hoping its a one off problem.
I have heard that there has been a few teething problems with the new 523-556 and 560 . has anyone else had any problems with theirs?
-
14-09-2007, 05:28 PM #2
Re: testo 523 analyzer troubles
I wish i had enough money to afford to buy one of these guages. Should count yourself lucky.
-
19-09-2007, 01:12 PM #3
Re: testo 523 analyzer troubles
You should have brought the Digi-Cool analyzer.
Doesn,t look as flash, but built like a brick sh*t
house.
I understand the early versions had trouble with static, causing them to self destruct.
-
02-11-2007, 11:45 AM #4
Re: testo 523 analyzer troubles
hi Fri 11 J .... did u get any satisfactory answer from Testo or store where you purchased this? I am interested to know how these products are supported.
Should be warrantable I am sure? You said 1 week old when problem surfaced? Do we need a "tester for the tester tool" ?
There are several other posts on these digital analyzers and its of interest to know which is the all round best value for money deal out there ....
-
02-11-2007, 05:30 PM #5
Re: testo 523 analyzer troubles
I looked at the 560 but were informed that due to manufacturing fault not now available untill mid 2008.
-
03-11-2007, 01:42 AM #6
Re: testo 523 analyzer troubles
I purchased the 523 in early summer and have had no problems of any kind with mine.
I'm very happy with the purchase which BTW, cost me 460 US dollars.
Similar Threads
-
Daikin Analyzer
By marc5180 in forum FundamentalsReplies: 10Last Post: 02-08-2008, 07:15 PM -
furnace troubles
By t-bone in forum Technical DiscussionsReplies: 5Last Post: 05-02-2007, 05:20 AM -
Ice machine troubles
By bfarmer in forum Trouble ShootingReplies: 18Last Post: 10-01-2007, 10:12 PM -
Hermetic analyzer
By Mickvee in forum Tools and CalculatorsReplies: 2Last Post: 16-04-2005, 10:20 AM -
energy analyzer
By kia jalali in forum Tools and CalculatorsReplies: 2Last Post: 21-12-2003, 10:17 PM