Results 1 to 4 of 4
Thread: Software
-
22-07-2007, 08:08 AM #1
Software
Hello Everybody,
I am Looking For software for designing Evoprative Condenser
-
22-07-2007, 04:24 PM #2
Re: Software
I doubt wether any are available. Specially for designing the Condensers and Evaporators, you should do it manually, which is of course time consuming.
If you browse through the posts of this forum, you will find discussions on similar subjects. Maybe that would give you an idea.
-
22-07-2007, 11:31 PM #3
Re: Software
There are various items of software available through the web.
Try Google with
"refrigerant condenser design software" and you will see several thousand.
Start here for a sample
http://www.coolit.co.za/coilsim/index.htm
but nothing beats doing it manually to know that you have understood what you are designing.Brian - Newton Abbot, Devon, UK
Retired March 2015
-
02-10-2007, 04:49 AM #4
Re: Software
Basic calc is evap load plus motor drawn power plus a safety factor, plus an oil cooler load. Select at a pull down point and add a an overall comefortable factor, based on a wet bulb local condition at the worst peek. BAC Coil.com or similar may help.
regards Magoo
Similar Threads
-
DX coil software
By abbasi in forum Tools and CalculatorsReplies: 6Last Post: 15-09-2009, 07:03 PM -
HVAC Software
By Samarjit Sen in forum Tools and CalculatorsReplies: 13Last Post: 11-10-2007, 11:24 AM -
Free Software, Bèta vers.: Designbuilder
By Peter_1 in forum Tools and CalculatorsReplies: 2Last Post: 05-01-2006, 12:01 AM -
Training software
By Morph in forum TrainingReplies: 13Last Post: 30-03-2005, 11:43 PM -
Notebook and Software
By Robearbam in forum Computers & the InternetReplies: 0Last Post: 13-05-2004, 05:23 PM