Results 1 to 6 of 6
Thread: Carrier Master Link II issue
-
23-08-2007, 06:36 PM #1
Carrier Master Link II issue
I've been working on a Carrier 50YZ packaged unit. It cycles on and off for about 2 minutes. I've tested all safety devices and the two fan motor thermal overloads, all are fine. It's got a Master Link II control board a MM195-BBx I think it is. I can't find a single bit of information on these, I've heard you have to configure these things for different units and they are well known for problems. Any help with a good resource on these things would be a great help.
-
23-08-2007, 11:59 PM #2
Re: Carrier Master Link II issue
Sorry Kevin I can't find any of those models on the Carrier sites.
I can find a Maestro control but that's as close as I can getBrian - Newton Abbot, Devon, UK
Retired March 2015
-
24-08-2007, 11:56 PM #3
Re: Carrier Master Link II issue
Well done Jollycold and thanks.
Also, welcome to the forum.Brian - Newton Abbot, Devon, UK
Retired March 2015
-
25-08-2007, 07:36 AM #4
Re: Carrier Master Link II issue
Many thanks. What a load of ***** this bit of kit is. Don't go near one. I phoned carrier and they only made 2.
-
25-08-2007, 10:08 PM #5
-
26-08-2007, 12:33 AM #6
Re: Carrier Master Link II issue
Some info from a large database for Carrier
http://www.docs.hvacpartners.com/idc...ments/techlit/
Similar Threads
-
carrier fault codes
By richelli in forum Trouble ShootingReplies: 5Last Post: 18-06-2010, 07:35 AM -
Carrier Chiller Help
By superswill in forum Trouble ShootingReplies: 7Last Post: 18-01-2007, 10:06 PM -
mitsubishi mr slim master and slave
By r600a-bang in forum Air ConditioningReplies: 2Last Post: 24-07-2006, 10:24 AM -
Carrier chiller oil migration
By lowtech in forum IndustrialReplies: 5Last Post: 30-04-2006, 04:11 PM -
carrier remote
By superswill in forum Trouble ShootingReplies: 2Last Post: 26-04-2006, 09:17 PM