Results 1 to 1 of 1
Thread: Trouble With A Bohn
-
23-08-2007, 03:48 AM #1
Trouble With A Bohn
Hey First Post And I Have A Problem With A Chiller It Is A Bohn 135 That Has Two Hitachi Screws On It That Have Been Replaced Recently (past Two Years ) My Problem Is One Of The Units Is Tripping On High Head Erratically ,but Runs Fine Most Of The Time. I Have Had Old Refer Guys Tell Me That The Old Screws Deposited Chunks Of Seals From The Load/unload Piston Into The Condenser At The U-bends. Does Anyone Know Or Have An Educated Guess. Model#acwc135sd Serial#boc8002
Similar Threads
-
Friga Bohn correction factors
By Andy W in forum CommercialReplies: 22Last Post: 18-02-2008, 01:56 PM -
york screw trouble
By sahidian in forum Trouble ShootingReplies: 9Last Post: 10-12-2007, 10:31 AM -
daikin vrv on/off remote signal trouble
By coriolan in forum Air ConditioningReplies: 7Last Post: 09-06-2007, 11:27 AM -
How to trouble shoot a system
By US Iceman in forum Trouble ShootingReplies: 12Last Post: 16-02-2007, 08:23 AM -
Trouble Shooting
By Vincent Yu in forum FundamentalsReplies: 20Last Post: 22-11-2005, 02:04 PM