Results 1 to 2 of 2
Thread: Excessive end float?
-
16-08-2007, 06:10 PM #1
Excessive end float?
Hi,
Playing with a York 6WF88 compressor. Whilst changing the shaft seal we inspected the thrust washer and found it to be badly worn. Does anybody know what the end float should be ? We found it to be 24 thou with a new thrust washer fitted.
Thanks
-
16-08-2007, 07:43 PM #2
Re: Excessive end float?
Sounds about right to me cheers Andy
Similar Threads
-
Excessive Frosting on the Evaporator
By vadivelan in forum FundamentalsReplies: 5Last Post: 23-06-2007, 12:18 PM -
Excessive Superheat
By AEGIS Cool in forum Technical DiscussionsReplies: 13Last Post: 26-11-2006, 08:06 PM -
Parker levels in ammonia systems
By Friobernal in forum IndustrialReplies: 3Last Post: 04-08-2005, 03:46 PM -
High pressure float expansion devices.
By DaBit in forum FundamentalsReplies: 6Last Post: 05-11-2003, 10:28 AM