Results 1 to 5 of 5
  1. #1
    fanman's Avatar
    fanman Guest

    I'm new to RE by a few minutes



    Hello,
    I was trained as an electrician in the UK in the Great Sixties when the UK had apprenticeships, proper 5 year trade training with "Experienced Tradesman" with an Indenture, (contract document, stating all the training conditions) at the conclusion! I still have mine.

    The downside of the sixties, electricians in the UK couldn't touch mechanical equipment, compressors, boilers, drives, gearboxes, unless it was the electrical parts/controls (components) in those long years ago.

    Working for a Canadian company, Powrmatic, producing air heaters in 1969 changed everything. They required a multi-disciplinary approach and everything was much more interesting to see a complete job through to completion, mechanical and electrical. Plus they started National air conditioning units and attempted to manufacture their own designs without much success.

    The next interesting part of work was assembling the first Henry vac cleaner for Numatic. Then as a mobile service engineer for Powrmatic, working at Fareford, Gloucester, commissioning the heating in a hanger with Concordes, 001 and 02, the first occasion two Concorde's. a French and a British aircraft were together. Very high securuity that day.
    At RAF Rissington, the maintenance hanger for the Red Arrows in '73, who were flying Hawker Siddley Gnats. Seeing the aircraft stripped down to the basic airframes after the whole Flight was grounded after at least one fatality. Being shown the cracks across several tail assemblie where tail fins could have dropped off within hours or even minutes if the planes had still been flying. Plus keeping the hanger warm for the RAF!
    Work can be good if it's interesting where you are working. Plus I have interesting and experienced people around me now, not always everyones good fortune.
    RE membership, time to learn more theory and practise from new people.
    Best wishes, fanman.
    Last edited by fanman; 07-08-2007 at 12:39 PM.



  2. #2
    Join Date
    Apr 2001
    Location
    UK
    Posts
    2,099
    Rep Power
    27

    Re: I'm new to RE by a few minutes

    Welcome to RE Fanman

  3. #3
    Join Date
    Aug 2006
    Location
    england
    Age
    50
    Posts
    3,856
    Rep Power
    46

    Re: I'm new to RE by a few minutes

    Welcome Fanman, the more the merrier!

    jon

  4. #4
    Brian_UK's Avatar
    Brian_UK is offline Moderator I am starting to push the Mods: of RE Site Moderator : and general nice guy
    Join Date
    Mar 2001
    Location
    Dorset
    Age
    76
    Posts
    11,025
    Rep Power
    60

    Re: I'm new to RE by a few minutes

    Fanman, welcome to the forum.

    It's good to know that there are others down here on our beautiful coastline.
    Brian - Newton Abbot, Devon, UK
    Retired March 2015

  5. #5
    Join Date
    Oct 2003
    Location
    Belgium
    Age
    62
    Posts
    5,630
    Rep Power
    34

    Re: I'm new to RE by a few minutes

    Fanman, a very warm welcome from me. As regular posters know, we have a lot of respect of the more 'older' posters, especailly those who want to learn something new.
    I even have more respect after the very nice intro you made, most posters these days only kicks open the RE-door and fires their questions without proper introducing themselves. This is what I call good basic manners.
    It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.

Similar Threads

  1. Efficiency of compressor assisted HRV
    By montreal in forum Heat Pumps
    Replies: 46
    Last Post: 27-08-2007, 08:51 PM
  2. Mitsubishi(s) Lock out in minutes
    By fridge doctor in forum Air Conditioning
    Replies: 0
    Last Post: 19-06-2007, 09:22 AM
  3. Defrost information needed
    By church2k in forum System Optimization
    Replies: 6
    Last Post: 04-06-2007, 04:04 AM
  4. Replies: 86
    Last Post: 15-01-2007, 04:14 AM
  5. Got 5 spare minutes ?
    By WebRam in forum Computers & the Internet
    Replies: 0
    Last Post: 16-10-2004, 08:44 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •