Results 1 to 10 of 10
Thread: DIY Install ~ R290 (Propane)
-
02-08-2007, 11:35 PM #1
DIY Install ~ R290 (Propane)
A customer has an existing Delongo DIY split, that he installed a year ago, and now wants to reposition it. Not something we are very interested in, but as he is our new customer already, I had a closer look.
The thing is, it operates with R290 fridge gas, aka CARE-40, which is a nice way to say Propane gas. Yes, it is a very friendly substance and all of that, but it is still propane gas, which {in the UK} surely means a CORGI engineer. How can that be DIY kit? Amazing how that can be bought in the UK with these restrictive laws on gas installation.
And more to the point, as a company, we cannot re-install it unless we get our hands on a CORGI-fridge engineer. Simple job, but not.
Am I looking at this correctly - ie CORGI engineer to re-install a propane 'DIY' fridge split?
-
02-08-2007, 11:38 PM #2
Re: DIY Install ~ R290 (Propane)
Why do the words R-290 & DYI seem like another way to say BOOM?
-
02-08-2007, 11:54 PM #3
Re: DIY Install ~ R290 (Propane)
Ahem...
I have been told that as it's contained inside a sealed system and there is no intention of igniting it, CORGI does not come in to it (a lot of Ultra Low Temp freezers runs on it)
Just remember that cleanliness is critical, a deep standing vacuum is needed.
If you still want a CORGI guy doing it, then as it happens, I'm registered. Just send me a PM.
-
03-08-2007, 06:13 AM #4
Re: DIY Install ~ R290 (Propane)
Hi
Just to let you know that you do not have to be corgi registered to use the care range of refrigerants.
Calor provide a safe handling course which is certified, similar to c&g 2078. I attended this course 2years ago, and i am led to believe you have to be registered to purchase such refrigerants.
Regards
PP
-
03-08-2007, 10:09 AM #5
Re: DIY Install ~ R290 (Propane)
Well you all ways have BBQ brand R-290!
Apperantly 9 out of 10 newbs agree! It's just as good *Groanes*
-
22-09-2007, 02:21 AM #6
Re: DIY Install ~ R290 (Propane)
I have just taken the hydrocarbon training course from BOC. Very good course and it enables me to purchase hydrocarbon refrigerants.
The course has given me a very clear understanding of the refrigerant.
The practicallities and also the most important safety factor.
Having in the past worked with Corgi (not qualified only did the training)
Use of refrigerant grade propane R290 is very different to the very poor quality propane used in bbqs (usually only 50% propane and consists of mercaptan that gives the smell)
Purity is the essence as the mercaptan can damage the compressors ( i believe)
-
22-09-2007, 10:42 AM #7
Re: DIY Install ~ R290 (Propane)
As the previous posters state.
When the stuff is in the system it is classed as a refrigerant and the only qualification to work with it is the 2078 or citb gas handle quals.
Its good stuff to work with and the risk is so small it is almost negligible.
You are at more risk boiling a kettle in a caravan.
Cheers taz.
-
22-09-2007, 11:05 AM #8
Re: DIY Install ~ R290 (Propane)
.
It may be worthwhile checking that your insurance liability cover extends to this type of work that you are evidently not familiar with.
.
-
23-09-2007, 08:08 PM #9
Re: DIY Install ~ R290 (Propane)
I contacted BOC about a course, they never even bothered getting back to me.
-
23-09-2007, 10:34 PM #10
Similar Threads
-
R290?
By andyh in forum RefrigerantsReplies: 15Last Post: 22-09-2007, 06:42 PM -
Propane Refrigerator Conversion
By zolar1 in forum RefrigerantsReplies: 26Last Post: 04-02-2007, 03:42 AM -
what is the best blend for low temp
By tony_rich in forum RefrigerantsReplies: 87Last Post: 05-08-2006, 08:29 AM -
propane compressor suction drum
By Ahmed_LNG in forum Technical DiscussionsReplies: 2Last Post: 03-01-2006, 10:31 PM -
propane compressor suction drum
By Ahmed_LNG in forum Trouble ShootingReplies: 0Last Post: 30-12-2005, 06:08 AM