Evening all,

Had a nice job yesterday, FFCR evaperator looks like its exploded although hasnt lost any gas. I Should be going back to site tommorow night to change but the bottom half of the coil has 3 golfball size holes, two at the back and one at the front with the finns blown outwards.
All the pipes in the lower half of the coil are crushed (Even the u-bends at the end). Even the metal fan (EBM) has a blade cracked due to it. Put a guage line on the check valve and there is still gas in there so i can only assume heater has caused it although the heaters seem to bell out ok.
Will take photos tommorow and post, just wondered if anyone else come accross it

Regards

Fatboy