Results 1 to 43 of 43
Thread: Air in NH3 plants
Hybrid View
-
02-03-2008, 02:47 AM #1
Re: Air in NH3 plants
Hello Everyone. This is my first post on this site. I am happy to find a site with ammonia people to chat with.
I operate a small ammonia system for a local food processor, and we use Hansen AutoPurgers in all of the ammonia systems at our facilities. We purge from the top of the condensers and the tops top of our high pressure receivers. In addition to just improving the overall efficiency of our systems, the purge counters have been wonderful early indicators of cracks and leaks in our evaporator coils.
-
02-03-2008, 03:30 AM #2
Re: Air in NH3 plants
Oregon Jim;
Welcome to RE.
It is nice to see another US NH3 guy on the board. I was going to send you a PM, but it seems that you have elected not to receive such.
Again, welcome to the forum
-
02-03-2008, 05:11 PM #3
Re: Air in NH3 plants
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
02-03-2008, 05:21 PM #4
Similar Threads
-
Heat Load Selection for EOT Cabin A/C in Steel Plants
By Samarjit Sen in forum Tools and CalculatorsReplies: 12Last Post: 19-11-2010, 12:17 PM -
Modern NH3 Refrigeration Plants
By Andy in forum NH3Replies: 10Last Post: 26-04-2008, 08:24 PM -
Oil return in NH3 plants
By Tycho in forum NH3Replies: 36Last Post: 15-08-2007, 11:00 AM -
Shock froster for FSB bakery plants.
By Pawel_Wisnik in forum Tools and CalculatorsReplies: 1Last Post: 19-01-2007, 09:24 PM -
Packs Supermarkets and larger plants in Canada
By Peter_1 in forum Supermarket RefrigerationReplies: 5Last Post: 11-09-2006, 07:01 AM