Results 1 to 3 of 3
  1. #1
    Join Date
    Aug 2006
    Location
    england
    Age
    43
    Posts
    3,790
    Rep Power
    38

    So much for an early finish



    "hello, ive got to keep pressing the reset......"

    And this is what i found.


    The first shows the leak, the second the fix and the third how tight it was
    Attached Images Attached Images
    Last edited by monkey spanners; 26-09-2007 at 11:14 AM.



  2. #2
    Brian_UK's Avatar
    Brian_UK is online now Moderator I am starting to push the Mods: of RE Site Moderator : and general nice guy
    Join Date
    Mar 2001
    Location
    Dorset
    Age
    69
    Posts
    10,444
    Rep Power
    50

    Re: So much for an early finish

    Great job, what did you do - lift the unit out, fix it and then put it back?
    Brian - Newton Abbot, Devon, UK
    Retired March 2015
    Please support http://the100project.net/Home

  3. #3
    Join Date
    Aug 2006
    Location
    england
    Age
    43
    Posts
    3,790
    Rep Power
    38

    Re: So much for an early finish

    Luckily the units where on a stand which was at just the right hight to lean over and get at it with the pepperpot burner on the oxy kit. Good job it was only leaking on the top where the copper is joined to the steel condenser as it would have been a right pain to get at the underside.
    Was in a rush as the milk tanker was waiting outside to pick up the evenings milking, or so i thought. It turned out he parks on site an picks up in the morning but no one thought to tell me
    I've seen quite a few of these prestcold/copeland units leak here, always worth a check if you can't find a leak.

    Jon

Similar Threads

  1. Positive air pressure system
    By LRAC in forum Commercial
    Replies: 43
    Last Post: 17-10-2008, 06:27 AM
  2. Early retirement?
    By shogun7 in forum New Technologies
    Replies: 2
    Last Post: 04-01-2005, 09:37 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •