Results 1 to 16 of 16
Thread: Frascold and propane
-
04-06-2007, 07:03 PM #1
improving poster
- Join Date
- Jul 2006
- Location
- Copenhagen
- Posts
- 39
- Rep Power
- 0
Frascold and propane
I would like to hear from everyone who has got eny experience with Frascolds 6 and 8 cyl. compressors. Have you had eny problems with them and propane (or other refrigerants)?
-
04-06-2007, 07:53 PM #2
Veteran Poster
- Join Date
- Aug 2006
- Location
- England
- Posts
- 495
- Rep Power
- 21
Re: Frascold and propane
Hello condor frascold compressors are good and run very smooth but they have very fine tollerances on wrist pin and big ends you have to make sure the suction super heats are set properly and they used for the specfied operating limits. other wise they seize up and smash
-
06-06-2007, 08:52 PM #3
improving poster
- Join Date
- Jul 2006
- Location
- Copenhagen
- Posts
- 39
- Rep Power
- 0
Re: Frascold and propane
Have you ever used them with propane?
-
17-12-2007, 11:42 AM #4
rookie poster
- Join Date
- Dec 2007
- Location
- Denmark
- Posts
- 10
- Rep Power
- 0
Re: Frascold and propane
I have a customer which uses Frascold with R1270, and they dont have any problems with it.
-
17-12-2007, 03:00 PM #5
regular poster
- Join Date
- Mar 2006
- Location
- Philippines
- Age
- 53
- Posts
- 124
- Rep Power
- 19
Re: Frascold and propane
Hi,
My experience is no good in frascold, 30hp & 15hp after 6 months I replace it with another brand.
-
21-12-2007, 01:18 PM #6
rookie poster
- Join Date
- Dec 2007
- Location
- Denmark
- Posts
- 10
- Rep Power
- 0
Re: Frascold and propane
What happend, and what brand did you switch to?
Originally Posted by guapo
-
21-12-2007, 10:25 PM #7
regular poster
- Join Date
- Dec 2007
- Location
- Volos, Greece
- Posts
- 46
- Rep Power
- 0
Re: Frascold and propane
Propane ? Inst it dangerous ?
-
21-12-2007, 10:40 PM #8
VIP Poster
I am starting to push the Mods: of RE
- Join Date
- Feb 2007
- Location
- UK
- Posts
- 2,473
- Rep Power
- 45
Re: Frascold and propane
Only if you smoke.... Originally Posted by Giannis
-
22-12-2007, 03:10 AM #9
regular poster
- Join Date
- Mar 2006
- Location
- Philippines
- Age
- 53
- Posts
- 124
- Rep Power
- 19
Re: Frascold and propane
Copeland compressor, damage piston & connecting rod. Originally Posted by Spiffinator
-
23-01-2008, 08:39 PM #10
Registered User
Hey, I am new to : RE
- Join Date
- Jul 2001
- Location
- AArhus, Denmark
- Age
- 70
- Posts
- 7
- Rep Power
- 0
Re: Frascold and propane
The glow in a cigaret is warm enough to ignite propane while the glow in a cigar is not - that is if you are not too eager to get home. Still it is a bad idea to smoke when working with any refrigerant Originally Posted by The Viking
-
24-01-2008, 08:15 AM #11
rookie poster
- Join Date
- Dec 2007
- Location
- Denmark
- Posts
- 10
- Rep Power
- 0
Re: Frascold and propane
So did you stick to a piston cormpressor, or did you choose a scroll? and what model? Originally Posted by guapo
-
24-01-2008, 09:44 PM #12
Registered User
I am just settling in to : RE
- Join Date
- Mar 2006
- Location
- Merate (LC) - Italy
- Age
- 53
- Posts
- 2,549
- Rep Power
- 24
Re: Frascold and propane
Hi guys, I'm an old member of the forum, been away for few months, and now I'm back as after sales in Frascold. I will more than happy to help you.
-
24-01-2008, 09:49 PM #13
VIP Poster
- Join Date
- Aug 2005
- Location
- USA
- Posts
- 5,302
- Rep Power
- 25
Re: Frascold and propane
Welcome back NoNickName. I was wondering what happened to you. How is the new job?
If all else fails, ask for help.
-
24-01-2008, 09:54 PM #14
Registered User
I am just settling in to : RE
- Join Date
- Mar 2006
- Location
- Merate (LC) - Italy
- Age
- 53
- Posts
- 2,549
- Rep Power
- 24
Re: Frascold and propane
Old company went balls up. I was hired shortly in a district heating substations manufacturing company, and then finally hired in Frascold. Nice to be here.
-
24-01-2008, 11:16 PM #15
Moderator
Site Moderator : and general nice guy
- Join Date
- Jan 2006
- Location
- Croatia
- Age
- 68
- Posts
- 2,263
- Rep Power
- 31
Re: Frascold and propane
Hi, N..N..N..
Good to see you around
and better is to get a new job... Originally Posted by NoNickName
Best regards, Josip
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
25-01-2008, 08:31 AM #16
rookie poster
- Join Date
- Dec 2007
- Location
- Denmark
- Posts
- 10
- Rep Power
- 0
Re: Frascold and propane
wuhuu, a Frascold employee Originally Posted by NoNickName
Can you please tell me who to contact @ Frascold?
I have been mailing to you (i.e. Frascold) now since start of December, no replies what so ever.
Its regarding purchase of spareparts.
(I work at a wholesaler)
tyia
Edit; my email adress deleted.Last edited by Spiffinator; 25-01-2008 at 09:20 AM.
