Results 1 to 22 of 22
Thread: PM valve selection
Threaded View
-
03-06-2007, 04:34 PM #1
PM valve selection
Hi there,
Danfoss has a programme called Dircalc which is for Industrial Refrigeration. This programme also selects the required components.
My question is for PM valves. There are three different ways which programme uses to select the PM valve.
1- Pressure Drop
2- Velocity
3- Size
By selecting one of the options then a valve is selected which completely differers from the other option.
In your expert opinion which one is the best and why? (if you don't mind explaining ).
Thanks in advance.
CheersEven Einstein Asked Questions
Similar Threads
-
Expansion Valve Selection
By raviperumal in forum Technical SpeculationsReplies: 12Last Post: 17-02-2010, 09:58 AM -
FRICK TDSH 233 Slide Valve and guide damaged
By 404cab in forum Industrial CompressorsReplies: 9Last Post: 30-07-2008, 11:24 PM -
Need a correctly sized valve
By Abe in forum CommercialReplies: 2Last Post: 26-10-2005, 08:42 PM -
TEV with MOP: how to keep valve body temp above bulb temp?
By DaBit in forum FundamentalsReplies: 5Last Post: 16-10-2002, 12:38 AM -
Valve "Hunting"
By Abe in forum Trouble ShootingReplies: 20Last Post: 21-01-2002, 12:29 AM