Results 1 to 5 of 5
Threaded View
-
04-08-2002, 01:45 PM #1
titanium and copper/brass/or stainless steel brazing?
To all dear sirs,
I am vinay here on this fantastic site for we the refrigeration professionals and i am very happy to know this site which is proving very much helpful for me these days.
now we shall go to the following problem ,i am facing these days.
could any one from you solve my problem of
how to braze or weld the pure 'Titanium' and the copper or brass or even the stainless steel so that i would be able to fabricate the cooling coil for anodising application . the cooiling coil will be of titanium and all other refrigerant piping will be of copper.
is there any other material other than the titanium for such an application i.e. for anodising application with respect of the H2SO4 ( sulphuric acid 20 % by volume )?
expecting your reply
have a nice time always.
vinay
Similar Threads
-
Brazing vs. soldering
By DaBit in forum FundamentalsReplies: 28Last Post: 19-03-2011, 11:50 AM -
Titanium BPHE
By NoNickName in forum New TechnologiesReplies: 5Last Post: 10-06-2008, 04:51 AM -
Brazing Procedure Qualification
By Delboy in forum FundamentalsReplies: 13Last Post: 18-12-2007, 07:04 AM -
Stainless steel insead of carbon steel
By torque in forum IndustrialReplies: 2Last Post: 23-09-2003, 09:45 PM -
Evaporators: Stainless Steel or Galvanized S.
By Friobernal in forum Technical DiscussionsReplies: 2Last Post: 28-10-2002, 09:04 PM