Results 1 to 5 of 5
Thread: 410a
-
29-05-2007, 06:56 PM #1
improving poster
- Join Date
- Mar 2007
- Location
- London, UK
- Posts
- 36
- Rep Power
- 0
410a
hi everyone
was just wanting to ask a question, im working at a small 410a dankin split, what sort of running pressures am i looking for.
thanks simon
-
29-05-2007, 07:29 PM #2
Moderator
I am starting to push the Mods: of RE Site Moderator : and general nice guy
- Join Date
- Mar 2001
- Location
- Dorset
- Age
- 76
- Posts
- 11,025
- Rep Power
- 60
Re: 410a
Check your P/T tables as it depends on the ambient temperatures.
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
29-05-2007, 09:07 PM #3
improving poster
- Join Date
- Mar 2007
- Location
- London, UK
- Posts
- 36
- Rep Power
- 0
Re: 410a
ok thanks...........
-
30-05-2007, 05:52 PM #4
Senior Poster
- Join Date
- Feb 2007
- Location
- north west
- Age
- 36
- Posts
- 243
- Rep Power
- 18
Re: 410a
as brian said but on the suction prob around 6 to 7 bar
adam
-
30-05-2007, 06:06 PM #5
VIP Poster
- Join Date
- Mar 2006
- Location
- Lancashire
- Posts
- 1,859
- Rep Power
- 28
Re: 410a
Suction around 110 psi and discharge around 400psi would be an average that iv worked to.
Similar Threads
-
410a charging
By gwilliamson in forum Air ConditioningReplies: 39Last Post: 17-11-2010, 05:03 AM -
Should we oil 410a Flare nuts
By Blueboy in forum FundamentalsReplies: 25Last Post: 04-11-2007, 07:40 AM -
410a refrigerant burns
By rbartlett in forum RefrigerantsReplies: 7Last Post: 22-10-2006, 10:07 PM -
mitsi r22 to 410a system
By rbartlett in forum Air ConditioningReplies: 3Last Post: 28-08-2006, 08:36 PM -
410a machines
By gwilliamson in forum RefrigerantsReplies: 2Last Post: 05-09-2005, 10:23 PM
