Results 1 to 37 of 37
Thread: Oil return in NH3 plants
Hybrid View
-
21-07-2007, 08:07 PM #1
Re: Oil return in NH3 plants
...I support Sergej opinion....
-
08-08-2007, 09:28 AM #2
Re: Oil return in NH3 plants
oil in ammonia systems will go black almost imediately due to carbon left in the oil at manufacturing it is not too detremental. especially if its shell. The newish oil on the block that doesnt go black is petrochem reflo 68a it amazing but a bit more expensive. the company triple treats it to remove all carbon. The other thing to watch in old systems is water due to older engineers not being too bothered about moisture ingress on NH3. I would feel safe putting oil from any part of the system back into the compressor if an oil test has been done by a laboratory and returned without a problem.
-
15-08-2007, 11:00 AM #3
Similar Threads
-
Scroll oil return port
By LRAC in forum CommercialReplies: 2Last Post: 10-11-2006, 08:35 PM -
Pressure regular valve for wet return
By hphien in forum IndustrialReplies: 5Last Post: 09-12-2005, 06:28 PM -
Oil return problems
By Peter_1 in forum IndustrialReplies: 37Last Post: 23-08-2004, 11:30 PM -
R404a Oil Return
By dallan in forum IndustrialReplies: 1Last Post: 23-08-2004, 12:40 AM -
return air
By subzero*psia in forum Air ConditioningReplies: 1Last Post: 12-07-2001, 04:02 PM