Results 1 to 33 of 33
Thread: My First Cascade "Fat Boy"
Threaded View
-
17-05-2007, 06:02 PM #6
Re: My First Cascade "Fat Boy"
Looking to that other site I now see another problem with picture 3.
You have ran the system and frozen the outside of your Heat exchanger, but unfortunately you didn't seal the pipes for the 2nd stage and also would have created lots of frost on the inside of the pipes.
Next time, seal the pipes before testing.
Also, the comp sounds wrong in your video clip. It sounds like the internal springs have came off and the motor is rubbing against the casing. (would you like to post the clip here for others to hear?)
ChillinLast edited by chillin out; 17-05-2007 at 06:07 PM.
IF AT FIRST YOU DON`T SUCCEED.
DESTROY ALL EVIDENCE THAT YOU TRIED!
and go get a cuppa
Similar Threads
-
Cascade Refrigeration System
By Vincent Yu in forum FundamentalsReplies: 71Last Post: 16-02-2012, 04:04 AM -
R-23 cascade system
By S.M.Gokhale in forum IndustrialReplies: 22Last Post: 08-08-2009, 08:04 AM -
Refrigerant for multi-stage and cascade systems
By lraja in forum RefrigerantsReplies: 0Last Post: 15-01-2007, 01:27 AM -
cascade systems
By Nuklhed in forum Refrigeration BooksReplies: 5Last Post: 30-03-2006, 01:04 PM -
Regulation regarding hydrocarbons in an cascade
By DaBit in forum FundamentalsReplies: 4Last Post: 19-01-2004, 12:42 PM