Results 1 to 5 of 5
Thread: Equal COmpressor
-
16-05-2007, 10:22 AM #1
Equal COmpressor
We are looking at equaivalent compressor
We have L' nite Hermetiq ( france make)
Model : TFH 4540 Z
20 Bar, Min -30 Deg C, Max 48 Deg C, 2500 tr/min & 12.9 cubic meter per hour.
this is a 3 HP compressor, 400v/ 3 Ph, 50Hz Ac operation on R 404A.
We need equivalent Maneurop/Danfoss which are available in India.
-
16-05-2007, 07:38 PM #2
Re: Equal COmpressor
Why not ask the question of your compressor supplier?
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
17-05-2007, 04:18 AM #3
Re: Equal COmpressor
Woo, dude. you only need a call to solve your problem..
-
17-05-2007, 06:32 AM #4
Re: Equal COmpressor
You need a Maneurop which gives 4486 W at -10°C TE /55°C TC, SH 11K and SC 8.5 K (or 5635 W at -5°C TE, same conditions)
That's all you need to select the proper Danfoss/Maneurop with their Foresee selection program .It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
17-05-2007, 06:53 AM #5
Re: Equal COmpressor
Many thanks. Since we do not deal with the compressor directly, we had to get the answers this way.
Similar Threads
-
Compressor loading, cooling, and range of operation.
By Air duster in forum FundamentalsReplies: 10Last Post: 02-04-2008, 08:39 AM -
Compressor pumping efficiency
By shogun7 in forum FundamentalsReplies: 0Last Post: 25-02-2004, 10:50 PM -
One Half of a Part Wound Compressor Motor is Burnt
By aygul in forum Trouble ShootingReplies: 2Last Post: 25-08-2003, 11:11 AM -
Compressor failure...... cause
By herefishy in forum Technical SpeculationsReplies: 8Last Post: 06-12-2002, 12:15 AM -
Starting a compressor, and receiver questions.
By DaBit in forum Technical SpeculationsReplies: 9Last Post: 24-08-2002, 12:37 PM