Samsung codes anyone please

[Brian_UK]

Please i desperatly need the reset codes for a Samsung AQV12fan

09 48 77 17 52 4 E

Welcome to the forum also.

[balaji]

dear sir
i got the codes from your threads but i dont know how to use it in samsung manual also it is not available can you please help me how to install the codes is it possible using the remode ?

[superswill]

dear sir
i got the codes from your threads but i dont know how to use it in samsung manual also it is not available can you please help me how to install the codes is it possible using the remode ?

http://download.yousendit.com/D011EDD87F4B86D2

download this example,swaping the shown code for your own

[Brian_UK]

I think that it has to be said Paul, there's a lot of semi-dead Samsungs out there

[superswill]

I think that it has to be said Paul, there's a lot of semi-dead Samsungs out there

I agree brian, but 99% of the threads have been from outside the UK, so maybe the level of technical back up out there is not up to the level it should be. This fault only seems to be on small inverter systems and from the threads I’m guessing are installed in domestic surroundings so without seeing the systems no one can guaranty the quality of the install as we all know inverter driven systems electrical wise have to be done by the book as otherwise all sorts of fun and games can occur, I’ve found powering on and off at the local switch on these systems rather than the R/C can cause this fault (it lose's its memory as every indoor PCB must be programed into what indoor unit it is fitted on) but other than that I personal cant explain these numbers just try my best to help all when needed, I am sure we all know on here I deal with a lot of Samsung in the uk but one thing I must stress I don’t work for Samsung but do have strong ties, I will never try to justify a manufacture as I am at the front line and deal with unhappy customers all-day everyday but hope my experience can help others

So even I can say they P*** me off too when this happens

[Brian_UK]

I think you're right Paul, I suppose it possibly applies with other makes although they may have an easier 'restart' method.

Stable electricity supplies are essential for modern electronics and aren't always thought about at the time of install.

You do begin to wonder whether the addition of a backup battery is required to reduce this type of failure (wrong word I know but..) however, extra bits mean extra bucks so won't happen for a while

[superswill]

I think you're right Paul, I suppose it possibly applies with other makes although they may have an easier 'restart' method.

Stable electricity supplies are essential for modern electronics and aren't always thought about at the time of install.

You do begin to wonder whether the addition of a backup battery is required to reduce this type of failure (wrong word I know but..) however, extra bits mean extra bucks so won't happen for a while

I think as systems become more electronically advanced, we are setting our self’s up for more and more problems, technology is a wonderful thing but I believe will are loosing site of what’s important, cooling or heating a given area to a set temp, when I started in this trade if someone had said to me I would be commissioning massive sites via laptop and have the ability to dial into those sites, I would said there mad!!! This industry has become more and competitive with all sort and manufactures springing up, and what do they differ on, there gimmicks as I call them, they all still heat and cool its just each manufactures selling point that sets them aside from each other, daikins VRV111, Mitsubishi G 50, sanyo gas driven VRV and Samsung wire less access ect ect so I think as brands push for the next big thing we the fire fighter on the road will get these silly problems on every bit of kit as more and more PCB’s/chips ect go into the systems

And where would be without faults I ask


Just my thoughts

[gosheto]

when I put the remote's batteries back on I see the LCD of the remote control flash with all digits/symbols, but then they disappear. am i doing something incorrectly?

[superswill]

when I put the remote's batteries back on I see the LCD of the remote control flash with all digits/symbols, but then they disappear. am i doing something incorrectly?

follow my advise on your thread

[chippy]

like a lot of others i would be grateful if someone could send me the reset codes. i live in spain and most of the problems where i live are caused by,builders supply electrics and people switching of at the mains when going away for any length of time. thanks

[kostovski]

Ok codes are 09 48 77 17 52 4 E then how to enter them and what about the E is this hexadecimal 15 and what about the zero? It does not make much since to call service all the time this happen since by winter time power glitches are so common?

[medvegyev]

I am new to RE

I have the same problem with Samsung Vivace model nr. AQV12VBA. Is it possible to have the code number please and the service manual?

Thanks,

medvegyev

[kostovski]

Samsung is not willing to give access to non dealers. I need service manual for aqv12fan. my mail is removed by Moderator
thanks!

[Pol]

Ok,here he goes again.

For Vivace 9 - 12 ; http://download.yousendit.com/FEE593C25CA71351

For Forte inverter 9 - 12;
http://download.yousendit.com/D9F82A4F14C07BD0

Including explanation on how to enter the option codes.

Could someone PLEASE park them somewhere where they can remain available for download longer than the yousendit - seven days?

Good luck,

Pol

[inha]

Stable electricity supplies are essential for modern electronics and aren't always thought about at the time of install.

You do begin to wonder whether the addition of a backup battery is required to reduce this type of failure (wrong word I know but..) however, extra bits mean extra bucks so won't happen for a while

You would think that the device should have this type of protection built in. I have several other makes of A/Cs in the same home, Mitsubishi and General Electric, subject to the same power irregularities and none of them have ever required a restart code.

I can’t imagine having to reprogram my TV (which is Samsung by the way) every time the power goes out.

[medvegyev]

Ok,here he goes again.

For Vivace 9 - 12 ;

For Forte inverter 9 - 12;

Including explanation on how to enter the option codes.

Could someone PLEASE park them somewhere where they can remain available for download longer than the yousendit - seven days?

Good luck,

Pol

Dear Pol,

Thank you very much.

Yours sincerely,

medvegyev

[kostovski]

Here we can use:
groups.yahoo.com/group/samsunghelp

I had to remove the hyperlink so copy-paste it at the proper place after the ht...

The group is free and open to everybody

Thanks to Pol and Zoran !

Ninko

[chippy]

pol

thanks for your help, muchas gracias

chippy

[chippy]

I would have thought with technology as it is that they could have incorperated a lockin code to stop this happening. A backup battery is ok to a point but it is just something else to go wrong.

[PRESS]

may you please send me the link for the sumsung codes as well . thanks

[Peter_1]

Look some posts higher Press, they're posted somewhere else.

[cmoore]

Hi, i have the same problem with a samsung AQV12FAN A/C, i dont suppose if someone has the codes or can tell me how i can get them ? Urgent now getting cold !!!
chz
clive

[froidclim]

hello all colegues

i go throut this thread and find the solution of my problem with samsung ac unit but whene i go to download the manulel and codes i found that the file was expired.
pls i need the codes and how to use theme .specialy i ask dear colegue POL to send me via e-mail the codes .
address deleted by Moderator
thx you are very helpfull

[Peter_1]

Froidclim, I just tried and it still works, so try once again.
Feeding with a spoon is for the babies.

[Peter_1]

Hi, i have the same problem with a samsung AQV12FAN A/C, i dont suppose if someone has the codes or can tell me how i can get them ? Urgent now getting cold !!!
chz
clive

Cmoore, do a small effort and read once this whole thread, the answer is in it and it's not hidden.
Have you seen our introduction forum or will this be your only post?
Cold? In Spain?
Sorry Mike, Samarjit and Josip, couldn't resist any longer

[cioby202001]

hello1

I hope to receive reset codes for Samsung air conditionated SH12ZPGA...Please help me...

[Peter_1]

Cioby, read once my the post above yours

[cioby202001]

OK,I read all your posts...Thank you for answer...But my problems continues...because not find nothing....Code,code...,but where are this code for my Samsung? I have 2 little childrens and I hope to resolve this problems...

[Peter_1]

groups.yahoo.com/group/samsunghelp
Do you need a Samsung code to program your kids?

[tareg70]

Hi guys any ,could any one help me with samsung service manual and the code please to tareg70@yahoo.com .
thanks in advance
Tariq

[treishpe]

can you upload the manual vor samsung vivace again please? the link has expired and my A/C is gone again.
thanks

[edit]
found it on the yahoo group. thanks.

[ahmetan]

Hi, did you find the memory code of your A/C?

[mgpetkov]

Hi,
I need option code for Samsung AQV-12MSAN.
10x in advance.

[radamanto]

Hi, this is my first post...
, i'm from Portugal and I have a Samsung SH09AWH unit that doesn't work at all, it has the same problem mentioned in the first post: it has 3 blinking lights in the inside unit (2 green and a red one).
I read this entire thread and now i know i must have the codes to enter in the unit. The problem is that all the links posted had expired except this one (groups.yahoo.com/group/samsunghelp) but it has no codes for my model. From there i ''only'' learn how to enter the codes in the unit.
So can anyone give me, please, the codes for this model. Samsung SH09AWH.
Thanks

[ANB]

Hi Superswill,

Any chance you could post those manuals again please? My SC09ZW8-SC09ZW8X is caput.

Thanks.

[paul_h]

Hi Superswill,

Any chance you could post those manuals again please? My SC09ZW8-SC09ZW8X is caput.

Thanks.

That code I put in the other thread not work? It was 25025 70340

[airefresco]

Sorry to dig this thread up again. I´ve been through this thread and a few others and google but can´t find the code for a Samsung SC09AWH. Does anybody have it, please? I am supposed to going to do a maintenance visit today, and the guy from site called me yesterday and said all three lights on the front of the indoor unit were flashing. So it would be nice to go to site prepared.

thanks.
paul..

[nike123]

SH09AWH
2 5 0 2 5 7 0 0 c 8

[airefresco]

Thanks Nike123

[nike123]

Thanks Nike123

Take care that this code is for SH not for SC model and may or may not work correctly.
Why you don't call local Samsung representative?

[paul_h]

Otherwise you could try 25025 70340
the sc09zw8, sh09aw8, sh09zw8 alll use that code
or SC09ZA8 010000 1700d9

I've got every code except for the one you are looking for. Couldn't find it in all the ones I got earlier, couldn't find it in this post http://www.refrigeration-engineer.co...66&postcount=6 either

[airefresco]

Thanks for the info.

I didn´t end up going to site today, so will have to try tomorrow. I´ve printed all the codes off, so i´ll the ones suggested first, then start working my way down the list.

I´ll you guys know which is the correct code.

cheers,
paul

[w.l.ong]

Hello All,
i like to have the codes & service manual for samsung A/C
Thank

[nike123]

I am sure that there is more than one model of Samsung A/C and therefore more then one service manual.

[airefresco]

Went to site today. The code that Nike123 gave didn´t work, however the code that Paul gave did. So for a Samsung SC09AWH the code is 25025 70340.

Thanks everyone for the help

[Brian_UK]

Thanks for the feedback Airefresco.

[paul_h]

I I figured it might, all our a/cs end in an "8", so it might just be a regional thing to say what country it was exported too. So I guess the australian sh09aw8 was the same as your sh09awh.

[airefresco]

It was a SC09. What does the difference? Just curious.

[paul_h]

It was a SC09. What does the difference? Just curious.

I'm surprised nike123s code didn't work then.
maybe sc = cooling only, sh = reverse cycle, but really I don't know. Even when I worked for a place that was their service agent they told me bugger all.
edit: But if so, it doesn't mean much, the only difference is a lack of a relay on the indoor PCB for r/v operation. They sent me craploads of cooling only PCBs without this relay by mistake when I was working there, and they all worked perfectly except for no heating with the same programmed codes.

[airefresco]

Well it´s a heatpump, so I don´t know if that´s right. Nevermind, thanks for trying. It´s not important, I was just curious.

paul..