Results 1 to 4 of 4
  1. 11-05-2007, 04:11 AM #1
    The MG Pony's Avatar
    The MG Pony
    The MG Pony is offline VIP Poster
    Join Date
    Apr 2006
    Location
    Not so sunny coast (BC Canada)
    Age
    41
    Posts
    1,620
    Rep Power
    24

    Identing a compressor!



    I need the specs off a compressor I have but been unable to find any. Perhaps any of you would have the info?

    Pic below!

    The steel stamped plate reads:

    E6195E 217UG20
    Last edited by The MG Pony; 09-11-2007 at 07:01 PM.


  2. 11-05-2007, 07:02 AM #2
    Sledge's Avatar
    Sledge
    Sledge is offline regular poster
    Join Date
    Aug 2006
    Location
    Canada
    Age
    61
    Posts
    149
    Rep Power
    18

    Re: Identing a compressor!

    hi

    I did a google search on are4 0025 1aa 200

    came up with:


    1/4 H.P. 115 Volt 1-Phase Refrigerant R22 Factory Replacement ...

    http://americanhvacparts.com/Merchan..._Code=new-2007
  3. 11-05-2007, 07:05 AM #3
    Brian_UK's Avatar
    Brian_UK
    Brian_UK is offline Moderator I am starting to push the Mods: of RE Site Moderator : and general nice guy
    Join Date
    Mar 2001
    Location
    Dorset
    Age
    76
    Posts
    11,025
    Rep Power
    60

    Re: Identing a compressor!

    Any luck with the Emerson site?

    http://www.emersonclimate.com/
    Brian - Newton Abbot, Devon, UK
    Retired March 2015
  4. 11-05-2007, 07:30 PM #4
    The MG Pony's Avatar
    The MG Pony
    The MG Pony is offline VIP Poster
    Join Date
    Apr 2006
    Location
    Not so sunny coast (BC Canada)
    Age
    41
    Posts
    1,620
    Rep Power
    24

    Re: Identing a compressor!

    No they only really show you there newest stuff, and sledge thats exactly what I got unfortunately totally useless, I'm trying to find its capacity rating.

    I hate their site any other you can get old compressor data easy, yet with emerson it all ways seems to be a bloody fight.
« Previous Thread | Next Thread »

Similar Threads

  1. can overfilling/overcharging damage a compressor?
    By fredjchavez in forum Trouble Shooting
    Replies: 10
    Last Post: 12-02-2009, 10:30 AM
  2. Different between compressor MYCOM single stage and compressor booster
    By thien nhat in forum Commercial
    Replies: 7
    Last Post: 13-12-2007, 06:31 PM
  3. Compressor pumping efficiency
    By shogun7 in forum Fundamentals
    Replies: 0
    Last Post: 25-02-2004, 10:50 PM
  4. One Half of a Part Wound Compressor Motor is Burnt
    By aygul in forum Trouble Shooting
    Replies: 2
    Last Post: 25-08-2003, 11:11 AM
  5. Compressor failure...... cause
    By herefishy in forum Technical Speculations
    Replies: 8
    Last Post: 06-12-2002, 12:15 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules