Results 1 to 26 of 26
  1. #1
    Join Date
    Jan 2007
    Location
    UAE
    Age
    48
    Posts
    13
    Rep Power
    0

    Carrier chiller basic board problem



    Dear friends I am facing problem on carrier pro dialog plus chiller Model 30GH 025 7290EE this chiller basic board faulty and i replaced with new basic board and removed EPROM from old board. But now display showing "conF" I checked chiller manual they mention when "conF" shows on the user interface this means that the basic board must be configured, this can only be done by carrier service





  2. #2
    Join Date
    Mar 2005
    Location
    u.a.e
    Age
    68
    Posts
    171
    Rep Power
    20

    Re: Carrier chiller basic board problem

    Hi noushad
    Yes,
    You have to contact UTS CARRIER, They will up load the new board,
    This is the problem with all new chillers processor broads when ever a replacement is required you have to upload it by them.
    malik55

  3. #3
    Join Date
    Jan 2007
    Location
    UAE
    Age
    48
    Posts
    13
    Rep Power
    0

    Re: Carrier chiller basic board problem

    Quote Originally Posted by malik55 View Post
    Hi noushad
    Yes,
    You have to contact UTS CARRIER, They will up load the new board,
    This is the problem with all new chillers processor broads when ever a replacement is required you have to upload it by them.
    malik55
    Thanks mr malik

  4. #4
    Join Date
    Mar 2005
    Location
    u.a.e
    Age
    68
    Posts
    171
    Rep Power
    20

    Re: Carrier chiller basic board problem

    It's okay, Go ahead
    Happy to share information if I had, Or may be someone else will help you.
    malik55

  5. #5
    Join Date
    Jul 2006
    Location
    Copenhagen
    Posts
    39
    Rep Power
    0

    Re: Carrier chiller basic board problem

    Have you entered the password? Then you can configure the board youself?

  6. #6
    Join Date
    Mar 2005
    Location
    u.a.e
    Age
    68
    Posts
    171
    Rep Power
    20

    Re: Carrier chiller basic board problem

    HI conDor,
    The pass word is also a problem,
    Pro Dialog chillers usually has 2 pass word , the second one is for the factory set up, and that is not mentioned in any cats,
    DO YOU KNOW THAT ONE?
    malik55

  7. #7
    Join Date
    Mar 2007
    Location
    turkey
    Age
    50
    Posts
    11
    Rep Power
    0

    Re: Carrier chiller basic board problem

    I guess it is Carel board. As far as I understand the eprom has not programmed yet. It has to be programmed by Carrier. Paswords will not help us. Passwords will heplp you after uploading the program to change the parameters.


    Best regards
    Coskun

  8. #8
    Join Date
    Jan 2007
    Location
    UAE
    Age
    48
    Posts
    13
    Rep Power
    0

    Re: Carrier chiller basic board problem

    Quote Originally Posted by ConDor View Post
    Have you entered the password? Then you can configure the board youself?

    Mr. Condor you cannot enter the password first
    I want to be done configuration of my basic board this display only showing ‘CONF’ you cannot enter anything. Password normally creating for any one change the parameters and un-authorized person touching the display

  9. #9
    Join Date
    Jan 2007
    Location
    UAE
    Age
    48
    Posts
    13
    Rep Power
    0

    Re: Carrier chiller basic board problem

    Quote Originally Posted by coztemur View Post
    I guess it is Carel board. As far as I understand the eprom has not programmed yet. It has to be programmed by Carrier. Paswords will not help us. Passwords will heplp you after uploading the program to change the parameters.


    Best regards
    Coskun
    Hi MR. Coskun
    Your right but this is basic board OP12AS001 and 2nos EPROM U2&U3 but we required to program basic board because EPROM we removed old this is working other board

  10. #10
    Join Date
    Mar 2005
    Location
    u.a.e
    Age
    68
    Posts
    171
    Rep Power
    20

    Re: Carrier chiller basic board problem

    Hi Costemur
    You are right, the board must first be uploaded and configured, the pass words required for system testing and system setup,
    This is for most of the new systems which has micro processor controllers, This is a money making business the manufacturers keeps secrets with them for to make good money, I still remember the old horses, you can at least run the machine by making some alterations, and now if a you don't have a same sensor,transducer, p.c board even a switch the whole system is dead and we feel shame about that we can not fix it.......
    malik55

  11. #11
    Join Date
    Jul 2006
    Location
    Copenhagen
    Posts
    39
    Rep Power
    0

    Re: Carrier chiller basic board problem

    Of couse you can program the board (on site), it is a bit tricky, but possible. You will just need the old eprom, the password, and the advanced manual (a few of carriers industrial engineers have it, and know how to do it on site). But you can also use a laptop and a hasp, that is much fastere.

  12. #12
    Join Date
    Nov 2005
    Location
    Ireland
    Posts
    23
    Rep Power
    0

    Re: Carrier chiller basic board problem

    When a new board is fitted, it will display Conf. The only way to programme the board is by Carrier Rep using "Carrier Service Tool" with a laptop. In behind the display is a sticker with a code starting with 88CS_ _ _. They will use that code to upload the correct information.

  13. #13
    Join Date
    Jul 2006
    Location
    Copenhagen
    Posts
    39
    Rep Power
    0

    Re: Carrier chiller basic board problem

    It is right that you program the board from the number written inside of the electrical box. The number is identifying what purpose the controller is used for, what refrigerant is used and so on. But it is NOT right, that you can't program it on site without a laptop. Just read the advanced manual, there is a good explanation, on how to do it. But i dont know how hard it is to get, they probably wont give it to everyone. They also have to make a living

  14. #14
    LRAC's Avatar
    LRAC is offline Veteran Poster I am starting to push the Mods: of RE
    Join Date
    Sep 2006
    Location
    Midlands
    Posts
    453
    Rep Power
    18

    Re: Carrier chiller basic board problem

    Hi all
    http://www.uk.carrier.com/products/C...n%20ranges.htm

    Go to this site find your chiller and download the manual for your controller, it can be done without the laptop it just take great deal of consentration.

    we only call in Carrier as a last resort.

    Regards
    Lrac

  15. #15
    TCUK's Avatar
    TCUK Guest

    Re: Carrier chiller basic board problem

    You need to call carrier service an enginer will come out with the correct softwear and upload it.

  16. #16
    moideen's Avatar
    moideen is offline Veteran Poster I am starting to push the Mods: of RE
    Join Date
    Apr 2008
    Location
    u.a.e
    Age
    48
    Posts
    417
    Rep Power
    22

    Question Re: Carrier chiller basic board problem

    Quote Originally Posted by noushad123 View Post
    Dear friends I am facing problem on carrier pro dialog plus chiller Model 30GH 025 7290EE this chiller basic board faulty and i replaced with new basic board and removed EPROM from old board. But now display showing "conF" I checked chiller manual they mention when "conF" shows on the user interface this means that the basic board must be configured, this can only be done by carrier service


    hi noushad,when you purchase anew board,it is allready programmed.especially in carrier chiller not remove "eprom".if u remove eprom program will be cancelled.may i know when you buy new processor board,is there not included 'eprom"?
    regards
    moideen

  17. #17
    Join Date
    Sep 2007
    Location
    Somerset
    Age
    69
    Posts
    4,758
    Rep Power
    46

    Re: Carrier chiller basic board problem

    TCUK and Moideen.
    Did either of you note when these post were added?
    IE. 2007

    Grizzly

  18. #18
    Join Date
    May 2008
    Location
    uae
    Age
    44
    Posts
    40
    Rep Power
    0

    Re: Carrier chiller basic board problem

    hi guys,
    i am also facing the same problem with carrier 30gx chiller in my cause compressor scpm board (alarm is loss of comunication with scpm board 3) we tried to replace new board but same alarm comes back does this board also requres software.

  19. #19
    Join Date
    Apr 2009
    Location
    israel
    Age
    50
    Posts
    778
    Rep Power
    18

    Re: Carrier chiller basic board problem

    hi there as said before on this forum no u dont need to configure a compressor board only make sure your dip's are set as previous board and comm is connected ok
    good luck

  20. #20
    Join Date
    Nov 2005
    Location
    Ireland
    Posts
    23
    Rep Power
    0

    Re: Carrier chiller basic board problem

    Quote Originally Posted by anish View Post
    hi guys,
    i am also facing the same problem with carrier 30gx chiller in my cause compressor scpm board (alarm is loss of comunication with scpm board 3) we tried to replace new board but same alarm comes back does this board also requres software.
    The compressor board does need software but this should have been done before you got it. The board has a few different uses and needs the correct software for a screw compressor. Ask your Carrier supplier if the software was programmed onto the board. If it has the software, carry out Goshen advice on checking your connections.

  21. #21
    ron21gallosa's Avatar
    ron21gallosa Guest

    Re: Carrier chiller basic board problem

    hi guys...

    i have a pending alarm on my 30gh050 chiller (alarm code 503)...

    also i am looking for the manual for the same model...

    hope u guys can help me out...

    tnx... and more power...

    ron

  22. #22
    Join Date
    Apr 2009
    Location
    israel
    Age
    50
    Posts
    778
    Rep Power
    18

    Re: Carrier chiller basic board problem

    hi there hi pressure circuit 5
    good luck

  23. #23
    Join Date
    Dec 2005
    Location
    Johor
    Age
    62
    Posts
    151
    Rep Power
    19

    Re: Carrier chiller basic board problem

    Ron21 pm me. I'll get you the manual.

  24. #24
    Join Date
    May 2008
    Location
    Belgium
    Age
    66
    Posts
    802
    Rep Power
    16

    Re: Carrier chiller basic board problem

    how old is the plant??? maybe its time to clean the condenser.

    Ice

  25. #25
    vivek's Avatar
    vivek Guest

    Re: Carrier chiller basic board problem

    Mr.Condor,

    can you please describe the steps how to Configure. Thanks

  26. #26
    vivek's Avatar
    vivek Guest

    Re: Carrier chiller basic board problem

    Mr.Lrac,

    Can you please describe the steps to configure the board and eeproms.

    thanks

Similar Threads

  1. Carrier Transicold problem
    By tsvetomir in forum Transport
    Replies: 17
    Last Post: 16-08-2010, 02:59 AM
  2. Trane HP Defrost Board Problem
    By FastEd in forum Heat Pumps
    Replies: 8
    Last Post: 05-09-2008, 01:30 AM
  3. York YK Chiller Problem
    By icebox in forum Refrigeration Books
    Replies: 13
    Last Post: 01-07-2008, 06:05 PM
  4. Carrier Chiller Help
    By superswill in forum Trouble Shooting
    Replies: 7
    Last Post: 18-01-2007, 11:06 PM
  5. Carrier chiller oil migration
    By lowtech in forum Industrial
    Replies: 5
    Last Post: 30-04-2006, 04:11 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •