liquid overfeed system design guide

[US Iceman]

All our talks, here on RE forums, are to spread good things and ideas all around the world and engineers in any field are entitled to do that in the best possible way they can...

Safety first, then good operation, then cost...

Those are my priorities.

Refrigerants are as safe as the person working on the system. There are no SAFE refrigerants IMHO.

Lana, I suspect you have a new appreciation for industrial refrigeration after your research on liquid overfeed systems. I know this was one of the most interesting topics I have learned.

[lana]

Lana, I suspect you have a new appreciation for industrial refrigeration after your research on liquid overfeed systems. I know this was one of the most interesting topics I have learned.

Hi US Iceman,

As always you are completely right. It is a nice piece of engineering work.

Cheers

[amirjhanem]

Dear Friend,
ASHREA Refrigeration hand book can help you about it .
if didnot have contact me
amirjhanem@gmail.com
or
amir.ghanem@ salemyork.com

[Chris Burton]

Hiya Lana, i work in a large Refrigerated depot with 3 seperate R22 overfeed systems doing +7c, +3c and -20c running on stal open drive recips. I've got some technical specs for design and sizing for surge drums from the 1970's which are really indepth. All run on a saturated design temp of +35c with single stage compression. Each compressor has an individual oil seperator plus an oil seperator in common discharge. If you need an info send me a post

[aansari]

Hallo to everybody:

There is an artical about the subject titled "Back to the Basics: What is the Right Liquid Feed Method for Your System? " puplished on IIAR, 2005, and written by Alan Simchick of Refrigeracion y Equipos, S.A. Mexico. I can emial it for you Lana if you send me your email. Of course US iceman got it.

[Samarjit Sen]

Hello aansari,

Maybe some members like me are also interested on the Liquid Overfeed System. Would not it be better if you provide a link to the same in this forum, so that others may also view it.

[aansari]

Dear Samarjit:
The artical is more than 1.2 MG and I can not attach it, please send your emial to sant it to you.

[Samarjit Sen]

Hello aansari,

Thanks for your offer. I tried to send you a PM stating my e mail, but could not do so as I was made to understand that either you have chosen not to recieve any PM or are not as yet authorised to recieve the same. Could I please request you to upload the same in www.yousendit.com and post the link in the forum in this thread.

Stating our e mail id on the post is not permitted. You may check my profile in the forum and send the mail.