Results 1 to 29 of 29
Thread: Gram Compressor
Hybrid View
-
17-06-2006, 01:55 PM #1
Re: Gram Compressor
Originally Posted by Sabroeclaus
You can supply parts in the Philippines? I need Shaft seal of the Compressor.
-
Re: Gram Compressor
York supplies most Gram spares...
In Europe, I believe for any discontinued product, the manufacturer is obliged to have spares in stock for a minimum of five years, and be able to supply spares for a minimum of ten years.
If you could supply us with what it says on the product plate, I believe we could do more then just make suggestions-Cheers-
Tycho
-
18-06-2006, 02:37 AM #3
Re: Gram Compressor
Hi Pootle
Check with YORK@Johnson Control for parts for GRAM. But if you require manuals , I have with me the HC/HCL/HCS manuals. If you need it, email me, its content 1.78 MB.
-
20-12-2007, 08:47 PM #4
Re: Gram Compressor
I have got a Gram compressor HC 4075 1999 Could u send me the details about this compressor and the manual an other thing can i use this compressor with ammonia.
my email is tosalmans@hotmail.com
thank you
-
16-04-2009, 06:59 PM #5
Re: Gram Compressor
I have got a Gram compressor Could u send me the manual to Grammatic 1502 control
-
17-04-2009, 02:57 PM #6
Re: Gram Compressor
Hi Guys
I know the original thread is very old but here is the history as i understand it.
Brodrene Gram (Gram Brothers) was a Danish family company manufacturing domestic, commercial and industrial refrigeration equipment.
It was dispanded as a group by a private equity company when they hit problems (mid 80's).
The domestic division was sold to a Polish company and is still manfacturing their for the Nordic markets.
Idustrial was sold to York with the eventual closier of compressor production.
The recips were their own make and design which competed with Sabroe, the screws were Frick.
And the commercial food service cabinets continue to be produced from the original factory at Vojens in Denmark.
Ficteixeira - I was given an operation and maintenence manual for the 1502 so will e-mail over.
Sturt.
-
18-04-2009, 02:57 PM #7
Re: Gram Compressor
My e-mail
ficteixeira@hotmail.com
thank you
-
08-08-2006, 06:03 PM #8
Re: Gram Compressor
We have been selling Gram compressors and parts since 1981, if you give a model and serial number of the compressor, I can help you with the shaft seal that you need if it's not too late
-
11-02-2007, 06:04 PM #9
-
11-02-2007, 08:38 PM #10
Re: Gram Compressor
First;
Welcome to the Forum Dexter
Is Rick G still there?
Second;
I have worked with the company Dexter is employed by in the past. I can recommend them highly.
Similar Threads
-
can overfilling/overcharging damage a compressor?
By fredjchavez in forum Trouble ShootingReplies: 10Last Post: 12-02-2009, 10:30 AM -
Compressor pumping efficiency
By shogun7 in forum FundamentalsReplies: 0Last Post: 25-02-2004, 10:50 PM -
One Half of a Part Wound Compressor Motor is Burnt
By aygul in forum Trouble ShootingReplies: 2Last Post: 25-08-2003, 11:11 AM -
Compressor failure...... cause
By herefishy in forum Technical SpeculationsReplies: 8Last Post: 06-12-2002, 12:15 AM -
Starting a compressor, and receiver questions.
By DaBit in forum Technical SpeculationsReplies: 9Last Post: 24-08-2002, 12:37 PM