Question:

What do you do when you overhaul a Frick TDSH 193,233, 283 and there is a problem on the Slide Valve.

The Slide Valve has been touching the discharge housing ( the guide) and both of them are now damaged.
On the top of the Slide Valve you can clearly see that they they are rotten, on the discharge housing there is maybe 3-4mm missing on the Slide Valve guide.


Somebody from York told me that there is no solutions for that.
Or also I heard that I could change the Slide Valve and the discharge housing and it will be OK. ( even if the housing is normally appaired)


Let me know....