Results 1 to 2 of 2
-
19-03-2007, 12:12 AM #1
Registered User
Hey, I am new to : RE
- Join Date
- Jan 2007
- Location
- USA
- Posts
- 6
- Rep Power
- 0
Servicing An Inficon Vortex Recovery Unit
I really hope I can fix this thing. I just bought an Inficon Vortex 708-202-Gr recovery unit off of eBay. The seller said that the motor works but it will not pull a vacuum. But for $108 I though id give this $700 unit a shot. Can any of you guys tell me what to expect? Id really like to know how hard these things are to disassemble and reassemble. Or if anybody knows a link to an exploded view drawing? I'm wondering if the price of parts are reasonable as well. I’m just a little shaky about it
ThanksLast edited by Grant_84; 19-03-2007 at 12:14 AM.
-
19-03-2007, 07:19 PM #2
Moderator
I am starting to push the Mods: of RE Site Moderator : and general nice guy
- Join Date
- Mar 2001
- Location
- Dorset
- Age
- 76
- Posts
- 11,025
- Rep Power
- 60
Re: Servicing An Inficon Vortex Recovery Unit
Had to chuckle, did a Google and it came back with four ebay entries, that was all!!
Anyway, found this, which isn't a lot I'm afraid but perhaps the manufacturer can give you some details direct.
http://www.inficon.com/download/en/V...0sellsheet.pdf
Must admit though, with most of these machines it's a case of unscrewing the thing to see what's inside.Brian - Newton Abbot, Devon, UK
Retired March 2015
