Results 1 to 9 of 9
-
20-02-2007, 03:29 PM #1
What is the best book to get for duct desing?
I woudl like a book that covers it all from start to finich and shows how to properly size ducting or how to analyze flows and thermal losses in different ducting sizes adn shapes.
I saw this one but I am not sure if it is good or not and wanted some suggestions:
Hvac Systems Duct Design (Paperback) - I saw it on Amazon
-
20-02-2007, 08:08 PM #2
Re: What is the best book to get for duct desing?
As a claimed engineer i would think that you should be able to source the information that you seek yourself.
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
20-02-2007, 09:59 PM #3
Re: What is the best book to get for duct desing?
Here is something you might investigate.
http://www.smacna.org/bookstore/inde...ftoken=7971348
Yes, they do cost money, but these are some very good sources.
I doubt you will find one reference that serves all of your needs. I never have.If all else fails, ask for help.
-
21-02-2007, 12:30 AM #4
Re: What is the best book to get for duct desing?
US Iceman - the on on amazon is cheeper.
Brian UK - Not sure what you problem is but I thought the point of a board like this would be to ask questions and search for information. I am an engineer but I have not done any duct sizing or duct analysis since college so I do not remember it and I need to re-learn what I did know and expand on what I never was able to learn.
-
21-02-2007, 12:53 AM #5
Re: What is the best book to get for duct desing?
Originally Posted by Jasno999
Of course, they are not so much of a "how to" book, so you might be better off with the cheaper one althought I have not heard of that specific book before.
But then, that doesn't mean anything. I don't do HVAC systems either.
PS. try not to be too hard on our MOD's.If all else fails, ask for help.
-
22-02-2007, 01:56 PM #6
Re: What is the best book to get for duct desing?
not being hard on him he was being hard on me.
Thanks for the info. I need a how too book and I don't know where to get one that is goign to be a good one.
-
22-02-2007, 02:17 PM #7
Re: What is the best book to get for duct desing?
Some of the new books on Amazon have electronic books where you can preview some miscellaneous pages. Otherwise, if you see something that might be useful, try a trip to your local library and see if they have a copy for a preview.
Some books sound good on the surface, others are.
It's part of the risk in buying something. I have a couple that did not work out as well as I would have liked... Oh well.If all else fails, ask for help.
-
01-03-2007, 08:58 AM #8
-
02-03-2007, 06:21 PM #9
Re: What is the best book to get for duct desing?
It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.