Results 1 to 3 of 3
Thread: Cold ROOm
-
07-02-2007, 11:27 PM #1
cgwade75 Guest
Cold ROOm
I am designing a building with a cold lab and was wondering what the typicall set points for this would be
-
07-02-2007, 11:37 PM #2
Moderator
I am starting to push the Mods: of RE Site Moderator : and general nice guy
- Join Date
- Mar 2001
- Location
- Dorset
- Age
- 76
- Posts
- 11,025
- Rep Power
- 60
Re: Cold ROOm
The set points would be as required by the system designers, yourself.
Before we can give meaningful answers we need a little more information, such as.....
Is the Cold Lab going to have people in it?
What, if any, are the products to be stored.
Are you designing a cold storage facility or a cooled labaroratory?
What is your design brief?Brian - Newton Abbot, Devon, UK
Retired March 2015
-
08-02-2007, 01:24 AM #3
VIP Poster
- Join Date
- Aug 2005
- Location
- USA
- Posts
- 5,302
- Rep Power
- 25
Re: Cold ROOm
Since you are an engineering student you should realize you have to start with some design parameters/requirements, otherwise it's just a bad guess on our part.
Once you have those parameters you should establish (and list) the assumptions you use as part of this design. It's all about documentation of the process.
So far you have not listed anything for us to help you.
