Results 1 to 6 of 6
Thread: Uinsab Ii Superior Password
-
08-12-2006, 01:57 PM #1
Uinsab Ii Superior Password
Dear sir,
Hi,i use SAB 163 Compressor and i forgot personal password for one of standby compressors.Dos anyone know how i can change the personal password again ?
-
08-12-2006, 08:26 PM #2
Re: Uinsab Ii Superior Password
Hi, Jahangir
I know Superuser key, but I am not entitled to give you that info, sorry . You must contact your YORK-JCI representative.
Why you make a different personal password for each compressor . If you change the original password to personal one, it will be OK if you use the same one for all compressors.
Best regards, Josip
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
-
14-12-2006, 10:11 AM #4
Re: Uinsab Ii Superior Password
Dear sir
Hi,i change 1266 to personal password but i forgot it.now i want to change suction SP but without personal password i cant change anything.i have a spare EPROM
and now i want to know :
1) can i change original with this one and set all parameter again ?
2) how i can reach Superior Password i.e. which part should i contact in YORK to provide it?
-
18-12-2006, 02:34 PM #5
Re: Uinsab Ii Superior Password
Hi If you punch 8270 it will work .But be carefull as all parameters are open.
1266 Is the last numbers in the old telephone nr for Sabroe
8270 is the post nr for Sabroe
If you put new e-prom you vill see when you power up again 3 lights are flasing and you have to specifiie
1 comp type
2 refrigrant
3 mode of running fks chiller/
Best regards HGS
-
18-12-2006, 04:04 PM #6