Results 1 to 26 of 26
Thread: Bitzer s6f30 2-stage compressors
Threaded View
-
02-04-2002, 10:10 PM #1
Bitzer s6f30 2-stage compressors
Hi guys,
im looking after a low temp pack,which is powered by 5x Bitzer s6f30 2 stage intermediate compressors.
Basically my intrest is this - what state is the ref 22 in as it passes thru intermidiate pipe, what direction,passage its taking and its principle for existing i.e is it increasing compressor capacity? etc.
rang bitzer tech a few times for enlightenment but i felt i knew more about product than them!
I should also point out that each comp has liquid subcoolers on it , which i believe not also helps increase capacity of system but also cools windings of each comp.As phial for liquid is mounted on comp intermediate pipe in a special pocket.
Marc if i remember did u work for nrc? as install is by them.
Ive downloaded regarding this comp off bitzer site but is all spec.
thanx jonah
Similar Threads
-
Cascade Refrigeration System
By Vincent Yu in forum FundamentalsReplies: 71Last Post: 16-02-2012, 04:04 AM -
Bitzer Octagon compressors
By RONB in forum Supermarket RefrigerationReplies: 25Last Post: 31-10-2010, 08:33 AM -
r-23 low stage, cascade system
By johnny1 in forum RefrigerantsReplies: 8Last Post: 21-11-2009, 09:01 PM -
Bitzer compressors
By Guy Hodgins in forum Trouble ShootingReplies: 1Last Post: 18-03-2004, 03:03 PM