Results 1 to 1 of 1

Threaded View

  1. 04-04-2024, 10:37 AM #1
    scruw's Avatar
    scruw
    scruw is offline rookie poster
    Join Date
    Mar 2010
    Location
    Suburb of Moscow
    Age
    62
    Posts
    18
    Rep Power
    0

    Continue theme Bearings Frick XJS/XJF 95-151

    I have overhaul compressor XJS 120 and finished work installation jackshaft. New bearing SKF factory with mark YOR.534B0101H24. I measured axial play and saw standard in play 0.025 mm. for 2CL series. Why then in service manual I see two different a picture: between a bearings two shims (any for install) and picture without a shims. After installation any we will be reduce the gap. What must be gap (axial play) on jackshaft, after close housing of shaft seal...?

    Kind regards
    Last edited by scruw; 05-04-2024 at 07:51 AM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules