Results 1 to 8 of 8
Thread: J&e Halls Compressor
-
27-10-2006, 02:51 PM #1
J&e Halls Compressor
Im on the look out for a halls 7 by 5 1/2 8 cylinder compound carcus if anyone knows were i might locate one i would be most apreciative.
-
28-10-2006, 12:13 PM #2
Re: J&e Halls Compressor
Are you trying to tell me you can't find one in Grimsby You'd trip over the things.
On a serious point try Humber Refrigeration they seem to be able to locate them.
I know that there are at least 4 / 5 in moth ball at PDM in Doncaster. I'm not sure who does their work now but they have shut down 2 plants and moth balled all the equipment.
On a lighter note you should locate them if you have missplaced one, they are big lumps of metal and tend not to wonder far if you put them down
Cheers taz.
-
30-10-2006, 02:12 PM #3
Re: J&e Halls Compressor
thank taz will try leads you gave me thanks again fennydom
-
30-10-2006, 05:19 PM #4
Re: J&e Halls Compressor
have you tried halls at derby,give paul on the trade counter a call,tell him mark at derby cold stores told you to call, i know they have outed a load of old stuff but still have some darkholed.
-
31-10-2006, 04:59 PM #5
-
01-11-2006, 05:47 PM #6
Re: J&e Halls Compressor
Bob smith?
He was my boss and Roy was contracting. I left before Roy was made up to supervisor and now I think its all gone. All the old plant is shut down and the plant rooms are very, very quiet I was in there last May and it seemed sad. Roy has gone I think now but Bob is still there in a managerial capacity somwhere.
Cheers taz.
Ps Sticky unloaders don't mention sticky unloaders.
-
01-11-2006, 06:09 PM #7
Re: J&e Halls Compressor
Just curious about J&E Halls Comps.
Would we know them by another name on this side of the Pond? Are they made in the UK
-
01-11-2006, 10:18 PM #8