Results 1 to 6 of 6
Thread: Trouble posting threads
Hybrid View
-
22-10-2006, 07:06 AM #1
Trouble posting threads
New to forum, thanks for the welcome wagon. I tried posting a new thread on the Industrial-NH3 sub forum but it would not take; keeps saying internal error. Any ideas? Would a thread that is too long do that? I will see if this takes and then do some "troubleshooting" We all know about that, Thanks
-
22-10-2006, 05:35 PM #2
- Join Date
- Jan 2001
- Location
- Fife, Scotland.
- Age
- 66
- Posts
- 1,103
- Blog Entries
- 2
- Rep Power
- 20
Re: Trouble posting threads
long thread will cause that. You are correct.
PS, welcome to the site.
-
23-10-2006, 12:11 AM #3
Re: Trouble posting threads
WebRam,
Do you also get this error if you take to long to write the message before it is posted?
I have had this happen several times where I have a message partially completed and the darn telephone rings. Upon completing the call I come back and finish the message and then post it. Result...error message and the text disappears. GRRRR!
Is this normal?
Thanks.
-
23-10-2006, 07:35 AM #4
Re: Trouble posting threads
No, it is not, but with computers you can expect almost everything...sh't happens
It happened to me few times , then I press back arrow (once or twice) to get my text back and all was ok. I am not sure is this all I did but you can try next time. Or open RE in new window and then copy/paste your text there.
Best regards, Josip
It's impossible to make anything foolproof because fools are so ingenious...
Don't ever underestimate the power of stupid people when they are in large groups.
Please, don't teach me how to be stupid....
No job is as important as to jeopardize the safety of you or those that you work with.
-
23-10-2006, 08:05 AM #5
- Join Date
- Jan 2001
- Location
- Fife, Scotland.
- Age
- 66
- Posts
- 1,103
- Blog Entries
- 2
- Rep Power
- 20
-
23-10-2006, 05:10 PM #6
Re: Trouble posting threads
Originally Posted by Josip
One more thing to check....