Results 1 to 2 of 2
Thread: enthalpy wheel
-
20-10-2006, 08:41 AM #1
enthalpy wheel
Hi sir
who know the enthalpy wheel manufacturer to meet the heat recovery efficiency around 80%? the enthalpy recovery ratio is around 50% for the plate heat exchanger. pls input your information.thx in advance!
best regards
LC
I hear...I forget;I see...I remember;I do...I understand
-
21-10-2006, 02:26 AM #2
Re: enthalpy wheel
the percentage depends on the two air streams, I would say 75% total heat transfer not impossible, with some warm humid air and some cool dry air