Results 1 to 4 of 4
-
06-10-2006, 05:53 PM #1
problem at 10 degrees ambient temp
Hy!
I have a problem with a refrigerator project. At 10 C ambient the TH diagram temp. is a little an strange.
I mean when the compressor runs, there are two small quick heating instead of one.
Is it posibble to have a small condenser?
-
06-10-2006, 06:22 PM #2
Re: problem at 10 degrees ambient temp
Misterious questions, could you please substantiate and explain better?
-
07-10-2006, 12:41 PM #3
Re: problem at 10 degrees ambient temp
At 10C ambiant temp.. when compresor is runing, there is a quick heating of TH temp. (not more the 3-4 min). This is normal I belive. But in my case there are 2 quick heatings during a run compressor of a cycle.
-
15-10-2006, 06:22 PM #4
Re: problem at 10 degrees ambient temp
Hey mihai ionut,
Explain fully what the heck is going on? What are your amp draws? pressures? sub cooling, super heat? Do you have a CPR on this unit or a low pressure switch from the suction line ?