xrv163-1.65

[Gerben]

Hello,

i'm looking for a Howden XRV163-1.65.
Back here in the Netherlands there is no XRV available.
It may be a running machine, or scrap, and we will do an overhaul and make it run again.

Regards, Gerben

[Tycho]

Maybe SES international can help, they are located in Delden

http://www.sesint.nl/index.php

Other than that, you could ask Howden

http://www.howdencompressors.co.uk/

[anand]

If you need Howden XRV163-1.65 screw compressor capacity controller Type FKD40A + FKD41A equivalent to Danfoss make EKC30 + EKC31 please write to info@manikengineers.com They are regularly supplying to Kirloskar Pneumatics Ltd. who are manufacturing these screw compressors under lience from Howden UK for past 20 years.

[Josip]

Hi, Anand

I do not want to be rude, but do you feel you push little too much


http://www.refrigeration-engineer.co...0002#post50002

If you need Howden XRV163-1.65 screw compressor capacity controller Type FKD40A + FKD41A equivalent to Danfoss make EKC30 + EKC31 please write to info@manikengineers.com They are regularly supplying to Kirloskar Pneumatics Ltd. who are manufacturing these screw compressors under lience from Howden UK for past 20 years.

http://www.refrigeration-engineer.co...0884#post40884

Hi
Why don't you send request at www.manikengineers.com They have exact equivalent of EKC30+EKC31 called FKD40+FKD41. I am sure their manual will also be same as EKC 30.
Regards
Anand

http://www.refrigeration-engineer.co...8352#post38352

Danfoss EKC30 + EKC31 was excellent controller. However, it is now out of production. But you can get a pin to pin replacement for the same from India. It is called FKD40A + FKD41A. visit www.manikengineers.com for details

Maybe I'm not right but let's hear other guys Yes, sometimes we try to help with some links, but....

Best regards, Josip

[TXiceman]

http://www.howdencompressors.co.uk/xrv.htm

Howdens XRV site. I'll send you a PM

Ken

[Andy]

If you need Howden XRV163-1.65 screw compressor capacity controller Type FKD40A + FKD41A equivalent to Danfoss make EKC30 + EKC31 please write to info@manikengineers.com They are regularly supplying to Kirloskar Pneumatics Ltd. who are manufacturing these screw compressors under lience from Howden UK for past 20 years.

Hi anand


Did you know that Kirloskar did the early XRV casings. Massive amounts of failures, put a lot of people of XRV's for good.

Casings are now made elsewhere and the problem has stopped. I am told the XRV is now quite a good compressor.

So for your referance I would say no thank you

Stop advertising on the cheap as we say in Ireland pony up

Kind Regards Andy