Results 1 to 4 of 4
Thread: mitis electric
-
11-09-2006, 06:16 PM #1
mitis electric
Hi guy's
we're about to use one of these 7kw as a R22 swap out. Anyone have any experience of doing this and is it really necessary to use a separate inconnect 240/24v ?
Cheers
Richard
-
11-09-2006, 06:24 PM #2
Re: mitis electric
You could probably get away with Richard but is it worth the risk if it causes problems ? I also think it generates less wiring mistakes as you definitely do not want 240v down your 24v terminals
Last edited by Brian_UK; 11-09-2006 at 11:37 PM.
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
11-09-2006, 06:51 PM #3
Re: mitis electric
Richard
We've done a few of the hitachi ones which insist on seperate supplies but we couldn't run new cables so utilised the existing four core and all is well
Al
-
11-09-2006, 08:09 PM #4
Re: mitis electric
Richard
We've fitted some where the indoor has had a seperate supply and some where we've used 5 core. No problems so far.