Results 1 to 8 of 8
Thread: Hall V127 compressor
Threaded View
-
22-08-2006, 08:08 PM #1
Hall V127 compressor
Looking for some advice on some repairs ive got to carry out on the above compressor. Im not too upto speed on these old compressors but im willing to have a go at anything. The shaft gland seal is knackered so i need to get the pulley off and start getting in to it. Can anyone tell me if this pretty much straight forward or am i in for a nightmare of a job! Your thoughts would be gratefully appreciated!
Similar Threads
-
can overfilling/overcharging damage a compressor?
By fredjchavez in forum Trouble ShootingReplies: 10Last Post: 12-02-2009, 10:30 AM -
Compressor pumping efficiency
By shogun7 in forum FundamentalsReplies: 0Last Post: 25-02-2004, 10:50 PM -
One Half of a Part Wound Compressor Motor is Burnt
By aygul in forum Trouble ShootingReplies: 2Last Post: 25-08-2003, 11:11 AM -
Compressor failure...... cause
By herefishy in forum Technical SpeculationsReplies: 8Last Post: 06-12-2002, 12:15 AM -
Starting a compressor, and receiver questions.
By DaBit in forum Technical SpeculationsReplies: 9Last Post: 24-08-2002, 12:37 PM